User's Manual

DTU-H100 Wi-Fi/Ethernet to RS485/RS232 Server User Manual
http://www.iotworkshop.com - 58 -
+ok<CR>< LF ><CR>< LF >
 Parameters:
 add: TCPB server address, can be IP address or url.
After device boots up again, the setting will be effective
5.2.2.35. AT+TCPTOB
 Function: Set/Query TCPB time out time;
 Format:
 Query Operation
AT+TCPTOB<CR>
+ok=<time><CR>< LF ><CR>< LF >
 Set Operation
AT+ TCPTOB=<time><CR>
+ok<CR>< LF ><CR>< LF >
 Parameters:
 time: TCPB time out time, <=600 (600s), >=0 (No time out), default 300
After device boots up again, the setting will be effective.
5.2.2.36. AT+TCPLKB
 Function: Query TCPB link status;
 Format:
AT+TCPCKB<CR>
+ok=<sta><CR>< LF ><CR>< LF >
 Parameters:
 sta: TCPB link status
 on, TCPB link OK
 off, TCPB link not availabe
5.2.2.37. AT+NTCPBSSLEN
 Function: Set/Query TCPB SSL function(Only for firmware version with TLS support this
feature)
 Format:
 Query Operation
AT+NTCPBSSLEN<CR>
+ok=<status><CR>< LF ><CR>< LF >
 Set Operation
AT+ NTCPBSSLEN=<status><CR>
+ok<CR>< LF ><CR>< LF >
 Parameters:
 status: on/off，Enable/Disable TCPB SSL function.
5.2.2.38. AT+REGEN
 Function: Set/Query TCP Client register packet, setting is valid after reboot.
 Format:
 Query Operation