User's Manual

DTU-H100 Wi-Fi/Ethernet to RS485/RS232 Server User Manual
http://www.iotworkshop.com
35
Figure 25. Device Management Page
Notes:
Restart device button: When you setting the parameters of different web pages, you will click
“Apply" button to confirm the setting, but the setting take effect only after user click the “Restart"
button here, the device will re-boot up and reflash the memory information with new changes.
WEB IO and Advances page function is reserved.
4.2. The device Usage Introduction
4.2.1. Software Debug Tools
Recommend to use two common software tools debugging and applying device.
(User can also select other tools used to debug serial and Ethernet port).
 Serial Debugging Software: ComTools
 Serial Debugging Software: Accessport
 Ethernet Debugging Software: TCPUDPDbg
4.2.2. Network Connection
User can select two methods to connect device base on dedicated application.
 Use The device STA interface
The device and debug PC2 connect to a wireless AP, another PC1 (or user device) connect to
device with serial port: