User's Manual

HF-A11x V3.1 User Manual
Shanghai High-Flying Electronics Technology Co., Ltd
www.hi-flying.com
48
 mask: WAN port subnet mask;
 gateway: WAN port gateway address;
This Instruction only effective for HF-A11x works as STA. After HF-A11x module boots up again,
the setting will be effective. But user can set this command when module configured as AP.
4.2.2.21. AT+ LANN
 Function: Set/Query LAN setting, only effective as AP mode;
 Format:
 Query Operation
AT+LANN<CR>
+ok=<address,mask ><CR>< LF ><CR>< LF >
 Set Operation
AT+ LANN=<address,mask ><CR>
+ok<CR>< LF ><CR>< LF >
 Parameters:
 address: LAN port IP address;
 mask: LAN port subnet mask;
This Instruction only effective for HF-A11x works as AP. After HF-A11x module boots up again,
the setting will be effective. But user can set this command when module configured as STA.
4.2.2.22. AT+ DHCPGW
 Function: Set/Query DHCP gateway address;
 Format:
 Query Operation
AT+ DHCPGW<CR>
+ok=<address><CR>< LF ><CR>< LF >
 Set Operation
AT+ DHCPGW=<address ><CR>
+ok<CR>< LF ><CR>< LF >
 Parameters:
 address: DHCP gate address;
4.2.2.23. AT+ TCPTO
 Function: Set/Query TCP timeout;
 Format:
 Query Operation
AT+ TCPTO<CR>
+ok=<time><CR>< LF ><CR>< LF >
 Set Operation
AT+ TCPTO=<time ><CR>
+ok<CR>< LF ><CR>< LF >
 Parameters:
 time: TCP timeout time.
 <= 600, (600s);
 >=0, (0 means no timeout);
 Default, 300s;
4.2.2.24. AT+ MAXSK
 Function: Set/Query maxima TCP connection;
 Format:
 Query Operation
AT+ MAXSK<CR>
+ok=<num><CR>< LF ><CR>< LF >
 Set Operation