Universal Controller Owner's Manual

14
Recording a Page
• 1. Select a Page using the Adjust 2 Up/Down Keys
• 2. Select the ADDRESSES to be edited
• 3. Press the MENU Key to access Constructs
• 4. Use Position Left/Right Keys to select
Constructs
• 5. Use the Adjust 1 Up/Down Keys to edit
Parameters
•6. Press Record
NOTE:
To Abort an operation press
SELECT again
Hands On Exercise
Programming a Page
• Program Page 1
– First Trackspot in Color 2, Gobo 8, Mspeed 92
– Second Trackspot in Color 5, Gobo 2,
Mspeed 96