Power Cue DMX User's Manual

PROGRAMMING A CHASE

Scenes made with moving lights may be programmed together into a sequence called a chase. You

can also make a chase with scenes of generic lighting.

1.Press Program/Edit

2.Press Chase

5.Select attributes for this chase step:

STEP-and STEP+allow you to move through

the series of scenes you are programming into

the chase, so that you can fine tune the

attributes.

FADEallows you to control the time between

steps and HOLDis the time that a chase rests

on one step before passing to the next fade time

and the next step.

You may adjust FADE and HOLD for each step

or you may choose to have all FADEs of one

length and all HOLDs of one length. In this

case select GLOBAL. The global time is set

later after all the chase steps have been

selected.

STOPhas three options:

•No effect

•The chase stops at this scene

•The chase loops to the start at this scene.

TheDIPLESScrossfade option is not active in

this version and is permanently switched on.

Press STORE.... to confirm the attributes for

the current chase step and loop to step no. 4 to

select the next step and edit its attributes. After

setting the attributes for the last required step,

press ESCAPE.