Power Cue DMX User's Manual

Remember that an audio input connection is not absolutely necessary. The Power Cue

DMX is equipped with an internal microphone to run audio functions. It is disabled by

inserting a jack plug into the audio socket.

SELECTING SCENE ATTRIBUTES - GENERIC LIGHTING

1.Press Prog/Edit. 2.Press Scene.

5(a).Scroll through the options under the Type

button. If you select MOVING ZONE, this

screen appears and you can then adjust the

various attributes. When step is not audio,

speedis enabled and may be adjusted using

the trackball. Slope is either switch or

crossfade. Loopis either loop or one-shot.

When you push dimthe level may be adjusted

using the trackball. Bump through the various

patternsto choose the zone effect you want.

Press STORE when finished. Note that the

speed refers to the time in minutes and sec-

onds taken for one cycle of the zone

pattern.

OR 5(b).Scroll through the options under

the Typebutton. If you select SOUND-TO-

LIGHT, this screen appears. If you now go

back into the channels menu, you will notice

that the channels no longer have levels but

are tagged bass, tenor, altoand treble. You

can select each channel and change the

bass, tenor, altoand treblesettings using the

trackball.

TIP!