DL.2 Digital Light User Manual

CHAPTER 3
The DL.2 Menu System
DL.2 Digital Light User Manual 33
Test Tab
Test_Home Screen
Homing sets a fixture to it’s default posi-
tioning. The fixture automatically homes
whenever it is connected to power.
You can manually home all or separate
mechanical functions using this menu tab.
• Motion All option on this manually homes
the entire fixture.
• Motion Pan/Tilt homes only pan and tilt
positions.
• Motion Iris/Zoom/Focus sets the Iris,
Zoom and Focus to default.
• Calibrate Motors realigns the Pan and Tilt stepper motors after maintenance procedures.
The DL.2 can also be remotely homed via a DMX controller, (see Control Function Options on
page 180) or through the Content Management Application, (see Editing Configuration Values
on page 205).
Test_Self Test Screen
You can check the mechanical functionality of
Pan/Tilt, Iris, Zoom, and Focus assemblies
on the fixture head. Select On to start the test
sequence.
The Video Test option opens the mechanical
iris and provides test patterns to check the
projection functionality. This lets you verify
that the graphics engine is operating without
having to use a DMX controller.