User guide

Hydraulic Generator Controller – HGC-2

Controller Setting Security - Passwords:

Password Protection:

The password is entered after first

clicking the ‘Password’ tab on the index

bar of the ‘dashboard’ screen, This

opens another window where the

password is entered.

NO Password – User Level:

This level allows the user to only

observe operation but not make any

changes to the parameter settings or

operation of the controller.

OEM level:

This level allows the equipment OEM access to all settings and controller functions.

NOTE:

Passwords may be obtained by contacting High Country Tek, Inc, sales and support department

‘File’ Menu Options:

The ‘File’ menus has two drop down options:

1. Read File.

2. Save File.

‘Read File’ when clicked, will allow the user

to look for previously saved HGC-2 setting

profiles and up-load these into the PC and

then into any HGC-2 controller.

IMPORTANT NOTE:

When editing the default data file that comes

with the controller, ensure that you choose the

correct file name for the model of HGC-2

ordered and used.

‘Save File ’ when clicked, Allow the user to save to PC hard drive the

setting file for an HGC-2 controller. This feature is used to store

different generator model profiles that can be retrieved quickly at any

time as required

For example: Use data file name "HGC-2-12.dat“ for the "HGC-2-12“