Manual
023-00354-Rev1.6 evc/epc User Manual 35
Copyright © High Country Tek, Inc. 2013
evc/epc Controller
With SAE J1939 Interface
Dual Output With Over Speed Protection
It works with dual fixed displacement pumps and switches valves ON or OFF according to the measured RPM.
The measured engine RPM can be from the
alternator , PPU, or SAE J1939.
BOTH outputs are ON when below .
-point A RPM,
coil A ramps down to minimum current.
-point B RPM,
coil B ramps down to minimum current
NOTE: with Ramps set to minimum times, the
outputs will drive ON/OFF valves