Instruction Manual

I
nstructions
1. Use 5v-2a adapter to fully charge the product.
2.Press and hold the power key for 3 seconds,
and the power key light turns blue For normal
opening.
3.
Press and hold the general mode button for 3
seconds, and the general mode button The
lamp turns
blue, and after 5 seconds of beeping,
the ultraviolet disinfection lamp lights up,Enter
disinfection state.
4. Short press the general mode button for 1
second, and the general mode key The lamp
goes out, the ultraviolet disinfection lamp goes
out, and exits the disinfection state.
5. With the back of the product facing up, press