Instruction Manual

Right side control button operation instructions
Power button: After the Power is plugged in, click the button to start up and the
"LCD display light "will light up.
1. Press "Mode" button until led display indicate " USB or SD", then display will
show number of folder, then number of songs and start playback.
2. Prees “Play/Pause“button: during the music playback, press once to
Pause the playback of music, and then press again to restore the playback
state.
3.
Prees “STOP” button: in the process of playing music, press once to
STOP playing music.
4. Press " Next or Prev" to select your desire song.
5. Press "RPT" once to repeat one song, the REP indication at the top left corner
on the led display will flash;Press "RPT" one more time to repeat all songs in the
track and the REP indication at the top left corner on the led display will appear.
Press "RPT" again to cancel repeat function.
6.
Press "RROG" For programming.press "STOP" button to stop playback. Press
"PROG" to enter programming mode. The led display will flash and indicate "P
01", select the song that you want to program and then press "PROG" again.
Press "Play/Pause" to stop programming and start to playback the programmed
songs. This unit can program up to 20 songs.
7. Press"VOL-" button
：
press once to attenuate the first level of volume until the
ear can not hear the sound.
8. Press"VOL+" button
：
press once to upgrade the volume,Until the ear feels
the sound is loud enough.
Note:
a. the control buttons are illustrated on page 7 of this book.
b. You can program 100 songs or 200 songs into the USB or SD card.Select
one of the songs to play quickly through the button function in front of the
product.And the song list can be updated and replaced (taken out and put in
from the top).
（
Up to 200 songs can be arranged
）
.
c. The song sequence programming method is explained on page 11 of this
book.
8
Hang a wall to operating instructions
249
MM
8-9MM
A wall or
something resembling a wall
1
）
If you need to hang on the wall,For example, USES the appropriate screw
(about KA4x22MM)
，
Choose to suit the metope of height
，
Choose a suitable
distance measuring tool, to determine the location of the screws.
2
）
Preparation work finished, the machine can be hung on the wall.
5