Owner's Manual

Control Panel
Power /Mode
Use the Power /Mode button to turn ON the Jukebox. The default mode when you
switch ON is RADIO. This button also allows you to choose your desired playback
mode.
You will scroll through in order: AM/FM RADIO, CDMP3 and BLUETOOTH®.
To power OFF the Jukebox, press and hold down the Power /Mode button for 3
seconds until the display turns OFF.
Pause /Play
Use the Pause /Play button to play or pause tracks while in playback modes
CD or BLUETOOTH®. The Pause /Play button is also used
when in RADIO mode to automatically search for stations.
Stop /Band
Use the Stop /Band button to stop tracks playing in playback modes CDMP3. The
Stop /Band is also used in RADIO mode to toggle between AM or FM radio.
Prev /Tuner
Use the Prev /Tuner- button to skip back to the previous track while
it is playing or to scroll through tracks to add to a playlist (applicable for CD, playback
modes). The Prev /Tuner- is also used in RADIO mode to manually tune stations
by-0.05MHz increments for ‘FM’’ or -9KHz for “AM” or hold the Prev /Tuner- button to
automatically start and search for strong frequencies for the next station.
Prog/Play mode
Use the Prog/Play Mode button to add a playlist in playback modes CDMP3 when playback is
stopped. To repeat a track or select shuffle mode, press the Prog/Play Mode button whilst a
track is being played.
Further info on this function on page 9
.
Next /Tuner+
Use the Next /Tuner+ button to skip back to the previous track while it is playing or
to scroll through tracks to add to a playlist (applicable for CD playback modes). The Next
/Tuner+ is also used in RADIO mode to manually tune stations by +0.1MHz increments for
‘‘FM’ or +10KHz for “AM” or hold the Next /Tuner+ button to automatically start and search for
strong freq .
6
Handling the Discs
- This unit has been designed specifically for sound reproduction from compact discs
bearing the mark. No other discs can be used.
- To remove a disc from its storage case, press down on the center of the case and lift
the disc out, holding it carefully by the edge
-Fingerprints and dust should be carefully wiped off the disc recorded surface with a clean cloth
(not included)
-Never use chemicals such as record sprays, anti-static sprays or fluid, benzene or thinner
to clean compact discs. Such chemicals will do irreparable damage to the discs plastic surface.
-Discs should be returned to their cases after use to avoid serious scratches that could cause
the laser pick up to skip.
-Do not expose discs to direct sunlight or high humidity and temperature for extended periods.
Log exposure to high temperature can warp the disc.
-Do not stick paper or write anything with a ballpoint pen on the surface of the label side.
-Do not use irregular shaped CD’s (Octagonal, heart-shape, etc) all of which can damage the unit.
Basic Operation
Insert the plug of the supplied Power Adaptor into the unit’s DC Input Socket (Part no. 15 shown on
Figure under “Description of Parts”) and then insert the adaptor plug into a mains power socket.
Power Button / Function Mode
Press the button to select the function mode –RADIO CD- BLUE– OFF
Long press for 3
seconds after power off
Light On/Off Button
Press this button to Power On or Power Off the lights.
Listening to a Compact Disc
Press Power Button
Select the CD Mode
7