Owner's Manual
Features
The Signify Mini Retro Jukebox has many great features and enables the user to
play music in a variety of ways. Some of the handy features that this device
includes are:
1. Built-in Bluetooth® receiver to play music wirelessly when paired to a
compatible Bluetooth® device. The Jukebox allows the user to control the fle
playback directly from their compatible Bluetooth® device.
2. AM/FM radio tuner with digital display and auto-search function. “FM”
frequency ranges from 87.5-108 MHz and “AM” 522-1620KHz.
3. Single CD player with MP3 audio fle compatibility.
4. 7 Colour changing LED lighting effect on the front panel of the Jukebox with
a power ON/OFF switch.
5. Great sound from the 2 x 2W RMS speakers .
6. USB Input (2.0) to playback MP3 audio fles stored on your USB Flash Drive.
7. SD card input to playback MP3 audio fles stored on your SD card .
Unit Specifications –
Speaker –
Output Power: 2 Watts x 2
Frequency Response – 180 to 12,000Hz
Impedance – 4 Ohms. Input Power: Max 3 Watts
Tuner –
FM – Frequency Range – 87.5 to 108 Mhz
AM – Frequency Range 522 to 1620 Khz
General –
Power: Input--100V-240V 50/60Hz. Output--DC 9v 1A
Power Consumption: 9 Watts
Unit Dimension (W*H*D): 270mm X 390mm X170 mm (approx.)
Weight: 2.61Kg (approx.)
Standard Accessories – Power Adaptor, Instruction Manual.
Package Contents
AM/FM Vintage CDMP3,USB,SD
,BT
Jukebox
Power Adaptor
Instruction Manual
4
PROG/PLAY-MODE
1.Whilst a track is playing, pressing this button enables mode of “Repeat Track”
2.Whilst you are not playing a CD, press this button to Program the playing mode. Press this
button (PROG) whilst you are not playing a CD, “P01” would be displayed on the LCD Display.
3.Press “PREV” or “NEXT” buttons repeatedly to select the desired track number.
4.Press “PROG” button again to confirm and save your selection and “P02” will be displayed
soon.
5.Repeat steps 3 and 4 by selecting the track numbers of your choice, and the track will be
saved in the same order. Continue entering the tracks in this way until all of your desired tracks
are stored (up to around 20 songs).
6.When you have entered all track numbers that you want, press the PLAY/PAUSE button to
begin playing the programmed sequence of tracks.
7.To erase your programmed tracks, press “STOP” button in program mode, open the CD Door,
or change to another function mode, and the normal playback will resume.
8.In the CD play normally
Press the "PROG" 1 next,The word REP will be displayed on the LCD display screen on the
juke box,Repeat After hearing this song;Press the repeat button again will play the whole
contents the disc, Press “PROG” one more time to select Random;The Led display will show
“RDM” on the top(press to playback in no particular orde).
Listening to the Radio –
1.Press “POWER” button to choose “FM” Mode
（
Long press for 3 seconds after power off
）
2.Press “STOP/BAND” this button to choose “FM” or “AM” mode.
3.Press “PLAY/PAUSE” it would search for stations automatically and also search memory
stations.
4.Search for stations as above mentioned. Press “PROG/PLAY MODE” repeatedly and select
the channel you already searched. And the table number will be displayed
***Click on the "play mode" shows "p01 or..." ,within 3 seconds,Click on the "tuner _", Choose
on a radio;Click on the "tuner +", select the next station.
5.Manual Tuning – Press the “NEXT/FF/TUNER+” or “PREV/FW/TUNER-“, it will increase or
decrease 0.05MHz respectively for FM and it will increase or decrease 9 KHz respectively for
AM. Press and hold the “NEXT/FF/TUNER+” or “PREV/FW/TUNER-“ for 2 seconds. The
device will automatically start and search the frequencies for the next strong station and stop
on that station.
9