User Manual

ENGLISH

TECHNICAL SPECIFICATIONS

Model PLUTO I

Channels 1

Circuit Digital Class D

OUTPUT POWER RMS @ 14.4 V

Watts @ 4 Ohms

Watts @ 2 Ohms

1 x 225

1 x 375

Loudspeaker Impedance 2 - 8 Ohms

Frequency Range –3dB 15 - 250 Hz

Damping Factor > 200

Signal-to-Noise Ratio 102 dB

THD+N < 0,01 %

Input Sensitivity 5,5 - 0,2 V

Filter Section

Sub Sonic Filter

Low Pass Filter

Bass Boost

15 - 50 Hz

50 - 250 Hz

0 - 12 dB @ 45 Hz

Start-stop capability > 7 V

High Level Inputs with EPS Yes

Low Level RCA Inputs Yes

Auto Turn On Yes

Bass Level Remote Controller Yes

Fuse Rating 1 x 35 A

Dimensions 115 x 35 x 166 mm

All Specications are subject to change

INTENDED USE

DISPOSAL

This product is only designed for use in a vehicle with 12 volt on-board voltage and negative ground and func-

tions as an amplier for audio signals. Any other use may lead to damage to the product or in the vicinity of

the product.

If you have to dispose the device, please note that no electronic devices may be disposed in the

household waste. Dispose the device in a suitable recycling facility in accordance with local waste

regulations. If necessary, consult your local authority or your dealer.