Manual
19
ENGLISH
MECHANICAL INSTALLATION
Before you start with the installation, disconnect necessarily the GROUND connection wire from
the battery to avoid any risk of electric shocks and short circuits.
CAUTION
• Avoid any damages on the components of the vehicle like air bags, cables, board computer, seat belts, gas
tank or the like.
• Ensure that the chosen location provides a sufcient air circulation for the amplier. Do not mount the device
into small sealed spaces without air circulation or near by heat dispersing parts or electrical parts of the
vehicle.
• All cables must be as short as possible to avoid losses and interferences.
• Use self-tapping screws (not included in delivery) to install the amplier in the vehicle.
INTENDED USE
This product is only designed for use in a vehicle with 12 volt on-board voltage and negative ground and func-
tions as an amplier for audio signals. Any other use may lead to damage to the product or in the vicinity of
the product.
Fastening