Instructions

20
FUNCTIONAL INSTRUCTIONS
PROCESSOR FEATURES AND OPERATIONAL CONTROLS
6
5
4
3
1
The SUB IN RCA jacks must be connected with the RCA output jacks of the head unit (Subwoofer Output).
The LINE IN RCA jacks must be connected with the RCA output jacks of the head unit (2 x Stereo Output Front/Rear).
The HIGH LEVEL INPUT (enclosed cable set with plug) can be used, if your head unit is not equipped with RCA pre-amplier
outputs. You can connect then instead the loudspeaker outputs of your head unit with the highlevel input cable set accordingly
(refer to the assignment on the next page right above.
Note: Please also refer to the information AUTO TURN ON function on page 19, section #2.
Note: Never use the HIGH LEVEL INPUT function and the RCA inputs (#6 and #8) at the same time together. This may
damage the electronics of the processor.
The AUX IN 3,5 mm jack can be connected with with external audio sources like MP3 player, smartphones, navigation systems.
The eight LINE OUT RCA jacks provide audio signals for ampliers, which can be modied and congurated with the DSP soft-
ware.
The REMOTE port is for the enclosed remote controller. Please refer to the information on the next page.
The OPTICAL input is suited for a Toslink cable connection with an external audio source that provides a SPDIF signal (stereo
PCM).
If necessary, connect the mini-USB port by using the enclosed USB cable to the computer on which the M-CONTROL soft-
ware is installed. The connection can be released after using the DSP software.
Do not extend the cable in any way with a passive USB extension because otherwise a awless communication between the
DSP processor and the PC can not be ensured. If you have to bridge longer distances, use an active USB extension with
integrated repeater. The LED next to the USB port lights up blue when a connection between DSP device and computer is
made via the USB cable.
If the POWER LED lights up, the amplier is ready for operation.
4 5 6 8 97
– +
POWER
USB
OUTPUT
FLFR
REMOTE
PC LINK
GND
+12V
REM OUT
REM IN
RLRRSUB LSUB R
AUX
INPUT
MAIN
INPUT
MAIN
AUX
OPTICAL
INPUT SEL.MODE OK
OPTICAL
INPUT
A B C D E F G H
POWER INPUT
M8-DSP DIGITAL SOUND PROCESSOR
HIGH LEVEL INPUT
– +
POWER
USB
OUTPUT
FLFR
REMOTE
PC LINK
GND
+12V
REM OUT
REM IN
RLRRSUB LSUB R
AUX
INPUT
MAIN
INPUT
MAIN
AUX
OPTICAL
INPUT SEL.MODE OK
OPTICAL
INPUT
A B C D E F G H
POWER INPUT
M8-DSP DIGITAL SOUND PROCESSOR
HIGH LEVEL INPUT
1 2
3
8
7
9
2