User Guide
Specications
Size 109W x 134L x 30.5H
Fuse value 1A mini ATC
Voltage range 9.5V -15V
Bass remote type HF-U-02
Fixed voltage output full range 4V
Adjustible subwoofer output voltage 0V -9V
Maximally Flat Frequency Response Main (-3dB) 10Hz to >50kHz
Input Impedance Low level inputs 20k Ohms
Input Impedance High level inputs 20k Ohms
Maximum high level Input Voltage on any input
before clipping
>48V
Maximum Output voltage at 1.0% THD+N
(subwoofer output)
9.0V
Signal to Noise Ratio (ref to 2Vrms out, unity gain) -84.0dBA
EQ boost Variable to+8.1dB
Unit turn on options 30mV High Level Audio, 59mV
RCA Audio, 2.2V DC Offset
Current Draw 0.32A
Turn on Delay Time 0.1 seconds
Setup test tone track 100 Hz & 1000Hz
Autotek products are designed and engineered in the USA by
www.maxxsonics.com
HF BXiPRO3.0 QSG 01 - rev2
WARRANTY
Maxxsonics USA Inc. warrants this product, to the original consumer purchaser, to be free from
defects in material and workmanship for a period of one (1) year from the date of purchase.
Maxxsonics USA Inc. will, at it’s discretion, repair or replace defective products during the warranty
period. Components that prove to be defective in materials and workmanship under proper installation
use must be returned to the original authorized Maxxsonics USA Inc. retailer from where it was
purchased. A photocopy of the original receipt must accompany the product being returned. The
costs associated with removal, re-installation, and freight are not the responsibility of Maxxsonics
USA Inc. This warranty is limited to defective parts and specically excludes any incidental or
consequential damages connected therewith. To view the full warranty, please visit the website.
Visit Hifonics.com