Welcome to the Hidrate Spark 3 Quick Start Guide. Breathe easy—we’ve made it short and simple.
In your box, you should have: A. B. C. Lid Soft Grip Body Sensor Stick B A C D. E. F.
STE P 1: PA R T S U S E D I N S T E P: Turn bottle upside down and unscrew the battery cover from the base of the bottle. B . Soft Grip Body C . Sensor F .
PA R T S U S E D I N S T E P: E . Battery F . Bottom Ring E F STEP 2: Once the battery cover is removed insert battery into sensor. negative – + positive The sensor will illuminate with a startup sequence.
STEP 3: PA R T S U S E D I N S T E P: Lastly, secure battery cover back on base of bottle. DO NOT overtighten the screw when reassembling. Overtightening may cause damage to the product. B . Soft Grip Body C . Sensor Stick F .
PA R T S U S E D I N S T E P: STEP 4: Make sure the arrow on the seal and on the inside of the lid are facing the same direction to prevent leakage. A .
PA R T S U S E D I N S T E P: To attach the finger loop, slide it underneath the metal pin on the back of the lid and loop it through itself. A . Lid D .
PA R T S U S E D I N S T E P: Mobile Phone Hidrate Spark Smart Bottle App STEP 6: Download our free Hidrate Spark Smart Water Bottle app from the App Store or Google Play store. Check that you have an internet connection and your Bluetooth is turned on. Follow the steps in the app to create an account, set parameters for a personalized hydration goal, add your bottle to your profile, and set your push notifications and glow reminders.
PA R T S U S E D I N S T E P: You! Hidrate Spark 3 Hidrate Spark Smart Water Bottle App S T E P 7 : last step Set down your bottle after every refill. Remember to sync the app near the bottle each day so your water is tracked correctly.
CLEANING INSTRUCTIONS PA R T S U S E D I N S T E P: A . Lid Wash thoroughly before first use. B . Soft Grip Body RINSE IMMEDIATELY AFTER EACH USE with the lid in the open position.
PA R T S U S E D I N S T E P: CLEANING INSTRUCTIONS Lid and Bottom Ring are Top-Rack dishwasher safe. A . Lid F .
CLEANING INSTRUCTIONS PA R T S U S E D I N S T E P: The Sensor Stick and Body of the bottle are HAND WASH ONLY. B . Soft Grip Body C .
PA R T S U S E D I N S T E P: A . Lid B . Soft Grip Body C . Sensor Stick F . Bottom Ring A B F C CLEANING INSTRUCTIONS ALWAYS STORE BOTTLE WITH LID, BOTTOM RING and SENSOR STICK REMOVED to allow parts to dry completely.
AT T E N T I O N : C O N TA C T A N D M O R E • Your Hidrate Spark bottle uses one CR2477 Lithium battery. During the battery replacement process these batteries represent choking hazard. We’re here to support you. If you ever need to contact us, here’s how: • Product is NOT designed for hot liquids. Use only with cold liquids. Chat with us on our website hidratespark.com • Adding ice can cause an inaccurate measurement. • Not for use with carbonated or pulpy beverages. Email support@hidrate.
