Spec Sheet

Application

The MiniProx

proximity card reader’s potted electronics enhance the security of

the reader. The slim, attractive design is ideal for indoor or outdoor mounting.

Features

w Accepts 5 to 16 volts, meeting most voltage requirements.

w Available with Wiegand or Clock-and-Data interface.

w Allows easy upgrade from magstripe to a proximity reader; no rewiring or pulling

of new cable required.

w Offers high reliability, consistent read-range and low power consumption in an

easy-to-install package.

w Mounts directly onto metal with no change in read range performance.

w Provides multicolor LED, compatibility with all standard access control systems

and internal or host control of LED and beeper.

w Includes multilingual installation manual.

ACCESS reliability.

Mullion Mount Proximity Card Reader • 5365 (Wiegand), 5368 (Clock-and-Data)

125 kHz Proximity

MiniProx

Reader

PAGE 1
MiniProx Reader ® 125 kHz Proximity Mullion Mount Proximity Card Reader • 5365 (Wiegand), 5368 (Clock-and-Data) ACCESS reliability. Application The MiniProx® proximity card reader’s potted electronics enhance the security of the reader. The slim, attractive design is ideal for indoor or outdoor mounting. Features w Accepts 5 to 16 volts, meeting most voltage requirements. w Available with Wiegand or Clock-and-Data interface.
PAGE 2
Features Specifications Mounting Unobtrusive design mounts directly onto metal including door mullions. Typical Maximum* Read Range Hazardous Location MiniProx® Reader Mounting Designed to mount onto a junction box included with each reader. The junction box is attached to an appropriate surface location utilizing four holes. ProxCard® II card - up to 5.5” (14 cm) ISOProx® II card - up to 5” (12.7 cm) DuoProx® II card – up to 5” (12.7 cm) Smart ISOProx®/DuoProx® cards – up to 5” (12.