Specifications

13.56 MHz How to Order Guide – D00529, E.1
June 2012 2007 - 2012 HID Global Corporation. All rights reserved Page 38 of 71
iCLASS OSDP Reader Part Numbers and Options
Card Reader Description
Base
Part No
Current
Rev No*
Color Options
Hardware
Options
5
Configuration
Settings
Options
iCLASS
Security
MIFARE CSN
3
Keypad
Configuration
4
Optional
Custom
iCLASS R15 Contactless Smart Card Reader
OSDP Enabled
Mullion Mount
Read-Only, RoHS Compliant
6142 C
G = Charcoal Gray
K = Black
P = Terminal Strip
with OSDP
(RS485) Module
00 01 02
03 04 05
06 07
0
1
P
Q
0 1 2
3 4 5 6 Z
For keypad
readers only
-XXXXY
iCLASS R30 Contactless Smart Card Reader
OSDP Enabled
European and Asian Back Box Mount
Read-Only, RoHS Compliant
6112 C
G = Charcoal Gray
K = Black
P = Terminal Strip
with OSDP
(RS485) Module
00 01 02
03 04 05
06 07
0
1
P
Q
0 1 2
3 4 5 6 Z
For keypad
readers only
-XXXXY
iCLASS R40 Contactless Smart Card Reader
OSDP Enabled
US, European and Asian Back Box Mount
Read-Only, RoHS Compliant
6122 C
G = Charcoal Gray
K = Black
P = Terminal Strip
with OSDP
(RS485) Module
00 01 02
03 04 05
06 07
0
1
P
Q
0 1 2
3 4 5 6 Z
For keypad
readers only
-XXXXY
iCLASS RK40 Contactless Smart Card Keypad
Reader
OSDP Enabled
US, European and Asian Back Box Mount
Read-Only, RoHS Compliant
6132 C
G = Charcoal Gray
K = Black
P = Terminal Strip
with OSDP
(RS485) Module
00 01 02
03 04 05
06 07
0
1
P
Q
0 1 2
3 4 5 6 Z
00 09 10
11 14 19
20 22 23
-XXXXY
iCLASS RKL55 Contactless Smart Card
LCD/Keypad Reader
OSDP Enabled
US, European and Asian Back Box Mount
Read-Only, RoHS Compliant
6172 B K = Black
P = Terminal Strip
with OSDP
(RS485) Module
00 01 02
03 04 05
06 07
0
1
P
Q
0 1 2
3 4 5 6 Z
00 09 10
11 14 19
20 22 23
-XXXXY
*Revision numbers and availability are subject to change without notice. Consult factory for availability.
1
Configuration Setting Options are as follows (Factory or Field Configurable):
00 = Beep on, LED normally red, reader flashes green on tag read 03 = Beep off, LED normally off, reader flashes green on tag read 06 = Beep on, LED normally off, host must flash red and/or green
01 = Beep off, LED normally red, reader flashes green on tag read 04 = Beep on, LED normally red, host must flash green 07 = Beep off, LED normally off, host must flash red and/or green
02 = Beep on, LED normally off, reader flashes green on tag read 05 = Beep off, LED normally red, host must flash green
2
iCLASS Security Options (Factory or Field Configurable): See Application Note Number 28 for additional information on Key Management.
0 = Standard (Reads all iCLASS cards with unique keys diversified from HID master key)
1 = Elite Key (Reads only iCLASS cards with unique keys diversified from matching site specific master key; consult factory for availability)
P = Standard with OSDP Tamper enabled
Q = Elite with OSDP Tamper enabled
3
MIFARE Card Serial Number (CSN) Wiegand Output Modes are as follows (Factory or Field Configurable). Refer to the "iCLASS Reader Wiegand Output Configuration Guide” for more details.
(SETTING NOT APPLICABLE WITH ELITE ORDERS. ELITE READERS DO NOT READ MIFARE CSN.)
0 = 32 bit 1 = 32 bit reverse (Same as 6055A and 6055BXX0011) 2 = 26 bit 3 = 34 bit 4 = 40 bit 5 = 37 bit 6 = 56 bit Z = CSN Suppressed
4
Keypad data is output via Wiegand cable. Reader processes keystrokes. OSDP interface supports standard OSDP keypad output. Configuration Setting options for Wiegand interface includes:
00 = Buffer one key, no parity, 4 bit message 09 = Buffer one key, add compliment, 8 bit message (Dorado) 10 = Buffer six keys and add parity
11 = Buffer one key and add parity 14 = Buffer one to five keys (Standard 26 bit output) 19 = Buffer four keys and add parity
20 = Single Key buffering
22 = Local PIN Verify. 23 = Buffer one to 11 keys
Note: Local PIN Verify requires User PIN code to be programmed into the iCLASS Credential at the factory or by using the iCLASS Card Programmer (consult factory for availability.)
5
The OSDP communication modules allow host driven communication using (HID Advanced Device Protocol) / OSDP (Open Supervised Device Protocol) over an RS485 (Half-Duplex) hardware interface.
RoHS compliant Readers are appropriately marked on reader and box. (RoHS or Restriction of Hazardous Substances Directive restricts certain hazardous substances in electrical and electronic equipment.)