Specifications

13.56 MHz How to Order Guide – D00529, E.1
June 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 19 of 71
Back Packaging
272 / 282 – MIFARE / DESFire - Combination Card Ordering Guide
The MIFARE + DESFire contactless card offers multiple High Frequency technologies to simplify card issuance for diverse systems or migration
projects. Personalize the card with a photo ID, magnetic stripe, barcode, or anti-counterfeiting element.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model 272 Standard PVC 282 Composite 40% Polyester / PVC *
MIFARE High Frequency Technology (Check One)
N – MIFARE 4K Bytes
Card Programming (Check One)
B - Programmed MIFARE and DESFire Technologies. Specify Programming Information –
P – MIFARE Programmed only not DESFire Technology. Specify Programming Information.
N - Non-Programmed MIFARE and DESFire
A - Non-Programmed MIFARE, Programmed DESFire Technology. Specify Programming Information.
DESFire High Frequency Technology (Check One)
K – DESFire EV1 8K Bytes
Front Packaging (Check One)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number
1
Back Packaging (Check One)
G - Plain White with Gloss Finish
2
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number
1
1 - Plain White with Gloss Finish with Magnetic Stripe
2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number
1
MIFARE High Frequency Card Numbering
3
(Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Laser Engraved)
4
B - Sequential Internal/Sequential Non-Matching External (Laser Engraved)
4
C - Random Internal/Non-Matching Sequential External (Laser Engraved)
4
Slot Punch
5
(Check One)
(IMPORTANT – Dual High Frequency credentials do not allow a slot punch due to the antenna design. HID recommends using a badge holder to attach this card to a
lanyard or badge clip).
N - No Slot Punch
DESFire High Frequency Technology Card Numbering
3
(Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Laser Engraved)
4
B - Sequential Internal/Sequential Non-Matching External (Laser Engraved)
4
C - Random Internal/Non-Matching Sequential External (Laser Engraved)
4
Option
- Custom Artwork
1
(Specify Artwork Number – Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from the above selections. Example: 272NBKG1MNM
Final Part Number
N
K
N
-
(Options #)
MIFARE 13.56 MHz Programming Information DESFire 13.56 MHz Programming Information
Bit Numbers . (example: 26 bit)
Format Number (example: H10301)
Facility Code .
(Custom Formats) Site Code . City Code .
OEM Code .
Internal Card No. Start . Stop .
External Card No. Start . Stop .
Special Instructions:
Bit Numbers . (example: 26 bit)
Format Number (example: H10301)
Facility Code .
(Custom Formats) Site Code . City Code .
OEM Code .
Internal Card No. Start . Stop .
External Card No. Start . Stop .
Special Instructions: .
1
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
2
Cards ordered with plain white front and back packaging, or custom artwork, will
still have a small “HID logo” " " and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card.
3
The external card number is
placed in the bottom right-hand corner for MIFARE 13.56 MHz and in the bottom center for DESFire on the back of the card.
4
For Laser Engraved external numbers, consult factory
for lead times and cost.
5
Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards.
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
Front Packaging
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number