Specifications

13.56 MHz How to Order Guide – D00529, D.5
Credentials
200/210 - iCLASS Card Ordering Guide
The iCLASS contactless smart card offers read/write capability. Personalize the card with a photo ID, magnetic stripe,
barcode, or anti-counterfeiting element.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
November 2010 © 2007 - 2010 HID Global Corporation. All rights reserved Page 9 of 65
Front Packaging
Back Packaging
200 Standard PVC 210 Composite 40% Polyester / PVC*
iCLASS Memory Size and Allocation (Check One)
0 - 2k Bits (256 Bytes) with 2 Application Areas 3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
1 - 16k Bits (2k Bytes) with 2 Application Areas 4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
2 - 16k Bits (2k Bytes) with 16 Application Areas
Programming (Check One)
C - Configured, Non-Programmed iCLASS. Programming Information Not Required.
P - Programmed iCLASS. Specify Programming Information.
Front Packaging (Check One)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number
1
Back Packaging (Check One)
G - Plain White with Gloss Finish
2
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number
1
1 - Plain White with Gloss Finish with Magnetic Stripe
2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number
1
Card Numbering
3
(Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Laser Engraved)
4
B - Sequential Internal/Sequential Non-Matching External (Laser Engraved)
4
C - Random Internal/Non-Matching Sequential External (Laser Engraved)
4
Slot Punch
5
(Check One)
N - No Slot Punch (Printed location of vertical slot punch will remain)
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
V - Vertical Slot Punch
B - No Slot Punch - Horizontal Punch compatible (Printed location of Vertical and
Horizontal slot punch will remain).
6
H - Horizontal Slot Punch
6
Option - Custom Artwork
1
(Specify Artwork Number – Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from check boxes above. Example: 2001CGGNN
Final Part Number - (Options #)
iCLASS Card Programming Information
Bit Numbers . (example: 26 bit) Format Number (example: H10301)
Facility Code .
iCLASS Elite ICE Number (if applicable) - .
(Custom Formats) Site Code .
City Code . OEM Code .
Internal Card # Start . Stop . External Card # Start . Stop .
PIN (2-12 digits) : Sequential: Start # Random: Length .
Special Instructions:
.
1
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
2
Cards ordered with plain white front and back packaging, or custom artwork, will
still have a small “HID logo” "
" and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card.
3
The external card number is
placed in the bottom right-hand corner on the back of the card.
4
For Laser Engraved external numbers, consult factory for lead times and cost.
5
Cards are provided with an optional
slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards.
6
The ability to add a horizontal slot punch requires a different iCLASS
antenna design. Users can expect a read range reduction of approximately 20% if they order options B or H for the Slot Punch. * The composite construction is recommended for all
cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.