Specifications

13.56 MHz How to Order Guide – D00529, D.5

SmartID Keypad Readers

SK10 - The SK10 is ideal for mullion mounted door installations. The SK10 offers dual-factor

authentication using keypad and card. Reading MIFARE (sector) or DESFire (application/file) card data, the

SK10 delivers the card data to an access control system using industry standard protocols, including

Wiegand. The reader can be mounted on a single gang switch box for US, EU or APAC usage by

ordering an additional mounting accessory.

SmartID Multi-Technology Readers (SmartTRANS)

SP10 - The SP10 is ideal for mullion mounted door installations. The SP10 reads either 125 kHz HID Prox

and AWID card formats in addition to MIFARE (sector) or DESFire (application/file) card data. The SP10

delivers the card data to an access control system using industry standard protocols, including Wiegand.

Mount the SP10 on a single gang switch box for US, EU or APAC usage by ordering an additional

mounting accessory.

SPK10 - The SPK10 is ideal for mullion mounted door installations. The SPK10 offers dual-factor

authentication using keypad and card. The SPK10 reads either 125 kHz HID Prox and AWID card formats in

addition to MIFARE (sector) or DESFire (application/file) card data. The reader will deliver the card data to

an access control system using industry standard protocols including Wiegand. Mount the reader on a

single gang switch box for US, EU or APAC usage by ordering an additional mounting accessory.

SmartID Biometric Readers (SmartTOUCH)

SB10 / SBK10 – This biometric reader comes with or without keypad and offers three-factor authentication

using biometric finger authentication, keypad and card. The reader is designed for a mullion mount, but

mount the biometric reader on a single gang switch box for US, EU or APAC usage by ordering an

additional mounting accessory.

SmartID Reader/Writers

SW100 – The SW100 is ideal for mullion mounted door installations. Read/Write application supports

T=CL (or legacy 3964) bi-directional serial protocol implemented over RS232, RS485 or RS422 physical

link. Enables read/write to MIFARE and ISO14443-4 credentials (DESFire, SmartMX).

SWK100 – The SWK100 is ideal for mullion mounted door installations. Read/Write application supports

T=CL (or legacy 3964) bi-directional serial protocol implemented over RS232, RS485 or RS422 physical

link. Enables read/write to MIFARE and ISO14443-4 credentials (DESFire, SmartMX).

SWD100 – Desktop reader/writer connects to a computer through a USB or RS232. The hosts send

commands to SWD100 in order to read/write data to MIFARE, DESFire and any other ISO14443-4 card

through T=CL (RS232) or PC/SC (USB Only) protocols.

SmartID Programmer (SmartTOOLS)

SmartTOOLS is a card programming software suite providing custom access cards and configuration card

programming of MIFARE cards.

ProxBurn is an access card programming component of SmartTOOLS. ProxBurn programs custom MIFARE

cards for use on SmartID access control readers. The ProxBurn package includes a CD with software

application and manuals, RS232 cable and SWD100 with RS232 interface.

ReaderTOOLS is a configuration card programming component of SmartTOOLS. ReaderTOOLS creates

configuration cards configuring SmartID readers to perform custom access control applications against

existing and new card populations with custom requirements. The ReaderTOOLS package includes a CD

with software application and manuals, USB cable and SWD100 with USB interface.