Specifications
13.56 MHz How to Order Guide, – D00529, D.5
November 2010 © 2007 - 2010 HID Global Corporation. All rights reserved Page 54 of 65
FlexSmart Readers
FlexSmart
®
Reader Part Numbers and Options
Card Reader Description
Base
Part No.
Current
Rev. No.*
Color Options
1
Hardware Options
Configuration
Setting Options
2
Card
Read
Mode
3
CSN Wiegand
Output Mode
4
Custom
Key
5
Keypad
6
Custom
7
HID FlexSmart
®
MIFARE Reader, Read only Capability, Reads HID
Formats in sector 1 and/or CSN, Wiegand or C&D output
(RoHS Compliant)
6075 B
K = Black Arch Slim
Z = No Bezel
N = Pigtail 18” (0.5 meter)
00 01
02 03
0 1 2
0 1
2 4
0 N/A XXXX Y
HID FlexSmart
®
MIFARE Reader, Read Only Capability, Custom
Configurable, Wiegand or C&D output
(Old Part # MX200) (RoHS Compliant)
6076 A
K = Black Arch Slim
Z = No Bezel
N = Pigtail 18” (0.5 meter)
00 01
02 03
4
0 1
2 4
1 N/A XXXX Y
HID FlexSmart
®
DESFire
®
Reader, Read Only Capability, DESFire
®
Custom Configurable, Wiegand or C&D output
(Old Part # DX200) (RoHS Compliant)
6077 A
K = Black Arch Slim
Z = No Bezel
N = Pigtail 18” (0.5 meter)
00 01
02 03
3
0 1
2 4
1 N/A XXXX Y
HID FlexSmart
®
MIFARE Keypad Reader,
Read only Capability, Reads HID Formats in sector 1 and/or CSN,
Wiegand or C&D (RoHS Compliant)
6071 A K = Black N = Pigtail 18” (0.5 meter)
00 01
02 03
0 1 2
0 1
2 4
0 0 9 N/A
HID FlexSmart
®
MIFARE Keypad Reader, Read Only Capability,
Custom Configurable, Wiegand or C&D output
(RoHS Compliant)
6072 A
K = Black
N = Pigtail 18” (0.5 meter)
00 01
02 03
4
0 1
2 4
1 0 9 XXXX Y
HID FlexSmart
®
DESFire
®
Keypad Reader, Read Only Capability,
DESFire
®
Custom Configurable, Wiegand or C&D output
(RoHS Compliant)
6073 A K = Black N = Pigtail 18” (0.5 meter)
00 01
02 03
3
0 1
2 4
1 0 9 XXXX Y
HID MIFARE Reader, Read/Write Capability,
HID Formats and/or CSN, Wiegand & RS232 Output
6055 B
G = Gray
B = Beige
W = White
K = Black
L = Long Pigtail
(9 feet/3 meters)
00 04
01 05
02 06
03 07
0
1
2
0 1
2 3
4
N/A N/A XXXX Y
*Revision numbers and availability are subject to change without notice. Consult factory for availability. All trademarks and registered trademarks are the properties of their respective companies.
1
Refer to the “13.56 MHz Accessories” page in this guide for additional bezel options.
2
6055, 6075. 6076 and 6077 Model Configuration Setting Options are as follows (factory programmed):
00 = Beep on, LED normally red, reader flashes green on tag read 04 = Beep on, LED normally red, host must flash green
01 = Beep off, LED normally red, reader flashes green on tag read 05 = Beep off, LED normally red, host must flash green
02 = Beep on, LED normally off, reader flashes green on tag read 06 = Beep on, LED normally off, host must flash red and/or green
03 = Beep off, LED normally off, reader flashes green on tag read 07 = Beep off, LED normally off, host must flash red and/or green
3
Card Read Modes are as follows (factory programmed): Refer to the "HID FlexSmart
®
Reader Wiegand Output Configuration" Guide for more details.
0 = HID Data only (Sector 1, MIFARE Application Directory or Sector Location, only applies if “CSN Wiegand output Mode” = 0)
1 = Card Serial Number (CSN) Only 2 = HID MIFARE Data or CSN 3 = DESFire
®
Custom 4 = MIFARE Custom
4
Card Serial Number (CSN) Wiegand Output Modes are as follows (factory programmed). Refer to the "HID MIFARE Reader Wiegand Output Configuration" Guide for more details.
0 = 32 bit 1 = 32 bit reverse (as in 6055A) 2 = 26 bit 3 = 34 bit 4 = 40 bit “Card Serial Number (CSN) Wiegand Output Modes” options 1, 2, 3, and 4 cannot be used if “Card Read Mode” = 0
5
Custom Key: 0 = Standard keys, 1 = Custom keys
6
Keypad: 0 = Buffer one key, no parity, 4 bit message 9 = Buffer one key, add compliment, 8 bit message (Dorado)
7
Consult Factory.