Specifications

13.56 MHz How to Order Guide, – D00529, D.5
D -
Output format:
Clock-and-Data Number of digits:
Wiegand Number of bits: Left Parity:
Odd
Even
Calculation First Bit: Last Bit:
Right Parity:
Odd
Even
Calculation First Bit: Last Bit:
Serial Number of chars:
Type (RS232/RS485/RS422): Baud rate:
E -
User interface:
Card reading beep (Yes/No):
Yes
No
Keypad key press beep (Yes/No):
Yes
No
LED, Left:
Set LED constant green
Set LED green when card is read
Set LED green when key is stroked
Set LED constant red
Set LED red when card is read
When combining green and red are combined, the
LED will set to yellow.
Set LED red when key is stroked
LED, Right:
Set LED constant green
Set LED green when card is read
Set LED green when key is stroked
Set LED constant red
Set LED red when card is read
When green and red are combined, the LED will
set to yellow.
Set LED red when key is stroked
Input pin 1 (When active to GND): Used for LED (Left/Right):
Left
Right
LED off
LED to Green
LED to Red
LED to Yellow
Input pin 2 (When active to GND): Used for LED (Left/Right):
Left
Right
LED off
LED to Green
LED to Red
LED to Yellow
Transfer all keys securely and do not place keys in this Order Guide. All custom formats require additional time to develop and test. Required is a customer sign-off before fulfilling the
first order.
Once your key is encrypted using the HID Key Wrapper program, fill-in the following information:
Wrapped Keys:
Access Key Sector
Access Key MAD
Wrapping Password (Pass Phrase) :
DISTRIBUTE OVER PHONE ONLY
Using the HID Key Wrapper program keeps your key secure during order processing.
November 2010 © 2007 - 2010 HID Global Corporation. All rights reserved Page 53 of 65