Specifications

13.56 MHz How to Order Guide – D00529, D.5
RMK40 – The RMK40 simultaneously supports magnetic stripe, iCLASS, and HID multi-technology
credentials. Additionally, the RMK40 supports dual factor authentication of identity by combining card
presentation and PIN entry. Either verify the PIN at the access control panel or locally by the keypad reader
using specially enrolled iCLASS credentials.
RMPK40 – The RMPK40 simultaneously supports magnetic stripe, Genuine HID Prox, AWID Prox, iCLASS,
and HID multi-technology credentials. Additionally, the RMPK40 supports dual factor authentication of
identity by combining card presentation and PIN entry. Either verify the PIN at the access control panel or
locally by the keypad reader using specially enrolled iCLASS credentials.
iCLASS Biometric Readers (bioCLASS
)
RLB57 / RWKLB575 – This biometric LCD/Keypad reader allows for three-factor authentication using
biometric finger authentication, keypad and card. User messages are displayed on an LCD screen. The
reader is designed to fit on a single gang switch box for US, EU or APAC usage. The reader is available
in read only or read/write configuration.
iCLASS Long Range Readers
R90 - The R90 is the largest size (12” or 30.5 cm square) and longest read range iCLASS contactless smart
card reader in the iCLASS product line. The R90 will read HID card formats from iCLASS cards, delivering
the information to an access control panel using industry standard Wiegand protocol.
iCLASS Reader/Writers
When your application requires the ability to read and write data to the card, use a read/write (RW series) iCLASS
product. The four standard iCLASS reader/writers are:
RW100 - Physically the smallest reader/writer, the RW100 is ideal for mullion mounted door installations.
The RW100 contains all the features of the R10, with the added features of read/write capability via RS232,
RS485, UART or USB.
RW300 - This 80 mm (3.15”) square reader is designed to mount to and cover standard EU and APAC
back boxes. The RW300 contains all the features of the R30, with the added features of read/write
capability via RS232, RS485, UART or USB.
RW400 - The RW400 is designed to mount to and cover single gang switch boxes primarily used in the
US. The RW400 contains all the features of the R40, with the added features of read/write capability via
RS232, RS485, UART or USB.
RWK400 - This reader/writer offers the same features as the RK40, with the extended ability to read/write
user data to iCLASS credentials via RS-232, RS485, UART or USB.
iCLASS Programmer
The iCLASS CP400 & CP575A Card Programmers are designed for on-site programming of access control data, PIN
codes, and user data onto HID iCLASS cards. The Card Programmer allows HID proximity formats, keypad PIN
codes, and user data fields to be programmed directly into iCLASS contactless cards. The CP400 Card Programmer
includes a desktop reader/writer, personalization diskette, universal power supply, and serial cable. The CP575A
Card Programmer includes CP400 features with the added capability of programming biometric templates for use in
the bioCLASS
reader and includes a bioCLASS reader/writer, personalization diskette, universal power supply and
USB cable. Ensuring security of the format and cards, required is an iCLASS Card Programmer license.
SmartID Readers
S10 – The S10 is ideal for mullion mounted door installations. Reading MIFARE (sector) or DESFire
(application/file),card data, the S10 delivers the card data to an access control system using industry
standard protocols, including Wiegand. Mount the reader on a single gang switch box for US, EU or
APAC usage by ordering an additional mounting accessory.
November 2010 © 2007 - 2010 HID Global Corporation. All rights reserved Page 5 of 65