Specifications
13.56 MHz How to Order Guide, – D00529, D.5
November 2010 © 2007 - 2010 HID Global Corporation. All rights reserved Page 47 of 65
SmartID Readers
SmartID Single-Technology 13.56 MHz Readers Part Numbers and Options
Card Reader Description
Base Part
No.
Current
Rev. No.
Color
Options
Application
1
SmartID S10 Contactless Smart Card Reader
Mullion Mount, Terminal Strip
Wiegand, Clock-and-Data, RS232, RS485 or RS422 (RoHS Compliant)
8030 D
S = Silver
HM = HID MIFARE (default)
HC = HID MIFARE (non-default)
CM = MIFARE
DM = Dual MIFARE
DF = DESFire
SmartID SW100 Contactless Smart Card Reader/Writer
Mullion Mount, Terminal Strip
Host driven RS232, RS485 or RS422 (RoHS Compliant)
8030 D
S = Silver
TC = T/CL Protocol
RW = 3964 Protocol (Legacy)
SmartID SK10 Contactless Smart Card Keypad Reader
Mullion Mount, Terminal Strip
Wiegand, Clock-and-Data, RS232, RS485 or RS422 (RoHS Compliant)
8031 D
S = Silver
HM = HID MIFARE (default)
HC = HID MIFARE (non-default)
CM = MIFARE
DM = Dual MIFARE
DF = DESFire
SmartID SWK100 Contactless Smart Card Keypad Reader/Writer
Mullion Mount, Terminal Strip
Host driven RS232, RS485 or RS422 (RoHS Compliant)
8031 D
S = Silver
TC = T/CL Protocol
RW = 3964 Protocol (Legacy)
1
All part numbers generated by the above grid (except HM = HID MIFARE) require an additional accompanying “format configuration”. The format configuration is a separate part
number that is combined on a PO with the above part number to make up the full definition of a reader. Format configurations are either generic (for public use) or custom. For generic
format information, see SmartID – Generic Configuration Document
(http://www.hidcorp.com/documents/smartid_configuration_guide_en.pdf). For custom format definition, see
Custom SmartID Format, MIFARE or DESFire Requirements on subsequent page. For more information on applications and format configurations, reference the whitepaper SmartID
Application and Configurations (http://www.hidcorp.com/documents/smartid_apps_configs.pdf
). The HM application provides standard reader configurations, including beeper and
LEDs. The HC application allows for configuration of beeper and LEDs.