Specifications
13.56 MHz How to Order Guide – D00529, D.5
iCLASS Read/Write Reader Part Numbers and Options
Card Reader Description
Base Part
No.
Current
Rev. No.*
Color Options Hardware Options
6
Configuration
Setting Options
1
iCLASS
Security
2
MIFARE CSN
3
Wiegand Output
Mode
Keypad Configuration
Setting Options
4
Optional
Custom
5
iCLASS RW100 Contactless Smart Card Reader/Writer:
Read/Write
Mullion Mount
Wiegand and RS232 or RS485 or USB or UART (RoHS Compliant)
6101 C
G = Gray
K = Black
T = RS232
4 = RS485(Full-Duplex)
M = RS485(Half-Duplex)
U = USB
B = UART to UART
00 01 02
03 04 05
06 07
0
1
C
D
0 1 2
3 4 5 6 Z
For Keypad
readers only
-XXXX Y
iCLASS RW150 Contactless Smart Card Reader/Writer:
Read/Write
Mullion Mount
Wiegand and RS232 or RS485 or USB or UART (RoHS Compliant)
6141 C
G = Gray
K = Black
T = RS232
4 = RS485(Full-Duplex)
M = RS485(Half-Duplex)
U = USB
B = UART to UART
00 01 02
03 04 05
06 07
0
1
C
D
0 1 2
3 4 5 6 Z
For Keypad
readers only
-XXXX Y
iCLASS RW300 Contactless Smart Card Reader/Writer:
Read/Write
European and Asian Back Box Mount
Wiegand and RS232 or RS485 or USB or UART (RoHS Compliant)
6111 C
G = Gray
K = Black
T = RS232
4 = RS485(Full-Duplex)
M = RS485(Half-Duplex)
U = USB
B = UART to UART
00 01 02
03 04 05
06 07
0
1
C
D
0 1 2
3 4 5 6 Z
For Keypad
readers only
-XXXX Y
iCLASS RW400 Contactless Smart Card Reader/Writer:
Read/Write
US, European and Asian Back Box Mount
Wiegand and RS232 or RS485 or USB or UART (RoHS Compliant)
6121 C
G = Gray
K = Black
T = RS232
4 = RS485(Full-Duplex)
M = RS485(Half-Duplex)
U = USB
B = UART to UART
00 01 02
03 04 05
06 07
0
1
C
D
0 1 2
3 4 5 6 Z
For Keypad
readers only
-XXXX Y
iCLASS RWK400 Contactless Smart Card Reader/Writer:
Read/Write, with Keypad
US, European and Asian Back Box Mount (RoHS Compliant)
Wiegand Output, and/or RS-232/422 or USB or UART
6131 C
G = Gray
K = Black
T = RS232
4 = RS485(Full-Duplex)
M = RS485(Half-Duplex)
U = USB
B = UART to UART
00 01 02
03 04 05
06 07
0
1
C
D
0 1 2
3 4 5 6 Z
00 09 10
11 14 19
20 22
-XXXX Y
iCLASS RWKL550 Contactless Smart Card Reader/Writer:
Read/Write, with LCD and Keypad
US, European and Asian Back Box Mount
Wiegand Output, and/or RS-232, RS- 485, USB or UART (RoHS Compliant)
6171 B K = Black
T = RS232
4 = RS485(Full-Duplex)
M = RS485(Half-Duplex)
U = USB
B = UART to UART
00 01 02
03 04 05
06 07
0
1
C
D
0 1 2
3 4 5 6 Z
00 09 10
11 14 19
20 22
-XXXX Y
*Revision numbers and availability are subject to change without notice. Consult factory for availability.
1
Configuration Setting Options are as follows (Factory or Field Configurable):
00 = Beep on, LED normally red, reader flashes green on tag read 03 = Beep off, LED normally off, reader flashes green on tag read 06 = Beep on, LED normally off, host must flash red and/or green
01 = Beep off, LED normally red, reader flashes green on tag read 04 = Beep on, LED normally red, host must flash green 07 = Beep off, LED normally off, host must flash red and/or green
02 = Beep on, LED normally off, reader flashes green on tag read 05 = Beep off, LED normally red, host must flash green
2
iCLASS Security options (Factory or Field Configurable): See Application Note Number 28 for additional information on Key Management.
0 = Standard (Reads all iCLASS cards with unique keys diversified from HID master key)
1 = Elite Key (Reads only iCLASS cards with unique keys diversified from matching site specific master key; consult factory for availability)
C = Standard with Open Collector Tamper enabled
D = Custom with Open Collector Tamper enabled
3
MIFARE Card Serial Number (CSN) Wiegand Output Modes are as follows (Factory or Field Configurable). Refer to the "iCLASS Reader Wiegand Output Configuration Guide” for more details. (SETTING NOT APPLICABLE WITH ELITE ORDERS. ELITE READERS DO
NOT READ MIFARE CSN.)
0 = 32 bit 1 = 32 bit reverse (Same as 6055A and 6055BXX0011) 2 = 26 bit 3 = 34 bit 4 = 40 bit 5 = 37 bit 6 = 56 bit Z = CSN Suppressed
4
Keypad data is output via Wiegand cable. Reader processes keystrokes. Configuration Setting options:
00 = Buffer one key, no parity, 4 bit message 09 = Buffer one key, add compliment, 8 bit message (Dorado) 10 = Buffer six keys and add parity
11 = Buffer one key and add parity 14 = Buffer one to five keys (Standard 26 bit output) 19 = Buffer four keys and add parity
20 = Single Key buffering
22 = Local PIN Verify. Requires User PIN code to be programmed into the iCLASS Credential at the factory or by using the iCLASS Card Programmer (consult factory for availability.)
5
Contact Factory for pricing, availability, and minimum order quantity.
6
All the following communication modules allow host driven communication using the iCLASS Serial Protocol. All the following communication modules (except USB) allow for card ID reporting instantiated by the reader. For multi-drop functionality, see iCLASS HADP/OSDP
Readers. All Reader/Writers are terminal strip readers. RoHS compliant Readers are appropriately marked on reader and box. (RoHS or Restriction of Hazardous Substances Directive restricts certain hazardous substances in electrical and electronic equipment.)
November 2010 2007 - 2010 HID Global Corporation. All rights reserved Page 35 of 65