Specifications

13.56 MHz How to Order Guide – D00529, D.5

Custom Card Artwork Placement and Inkjet Location Guides

Standard PVC and Composite PVC/Polyester Cards

Company Name: PO No. Date

Quantity: Card and Artwork File No.

1. External Number:

Standard Location: The standard external # location is shown on the template below. The external # can only be printed on

the back of the card. The external # will be printed in the standard location, unless otherwise specified.

Custom Location: Indicate the desired external # location by writing "12345" on the appropriate template. The external

# can only be printed on the back of the card.

2. An Artwork File Number is placed on each card. The standard location is indicated by the "CCCCC". The standard location

for the custom artwork number is on the back side of the card. Indicate/incorporate the artwork number on the artwork.

If there will be front side printing only, the custom artwork number will be placed on the printed side, opposite the standard

location.

3. Artwork Placement: Indicate the placement of your artwork on the template below. Custom artwork must clear the

slot punch locations and edges by a min. of 0.125".

4. Magnetic Stripe (Optional): If the location of the magnetic stripe is custom (other than standard) and/or if other types of

magnetic stripes are to be added to the card (for example Debitek stripe), indicate the locations of the magnetic stripe(s) on the

template.

Standard Location Custom Location

Card Artwork Templates

Notes:

1. External # location reads in the direction as shown. External # character height is approximately 0.1".

2. Cards will have a small “HID logo” "

" and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card.

3. A standard custom artwork file number is printed on the back side of the card. Front side printing of this same number is an option.

4. Slot punch location "indicators" will appear on the back side of the card only.

5. Do not order slot punched cards for use in dye sublimation printers.

Slot edge may damage the printer ribbon. Slot should be punched after dye sublimation printing.

6. Some video imaging printers cannot accommodate pre-slot punched cards. Consult with the printer manufacturer prior to ordering.

Name:

Signature:

Date:.

Slot Punch Indicators

Back Front

12345 = Card ID Number

YYYYYYYY-YY = Sales Order Number