Specifications

13.56 MHz How to Order Guide – D00529, D.5
1451/1457 – Combination (MIFARE
®
DESFire
®
EV1 / PROX) Card Ordering Guide
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
November 2010 © 2010 HID Global Corporation. All rights reserved Page 20 of 65
1451 (4K) Standard PVC 1457 (4K) Composite 40% Polyester / PVC *
MIFARE DESFire EV1 Memory Size
If you are placing a re-order for a DESFire card based on the 0.6 version of the chip, you must omit this character from the part number. For
example, for a non-programmed PVC card, the part number should be 1450N_____.
C - 8K Bytes MIFARE DESFire EV1
DESFire Programming (Check One)
L - Programmed, (125 kHz only)
6
. Specify Programming Information.
N - Non-Programmed (125 kHz & 13.56 MHz)
6
. Programming Information Not Required.
Front Packaging
S - Custom Programmed , (13.56 MHz only)
6
, Prox Configured Specify Programming Information.
R - Custom Programmed , (125kHz and Custom 13.56 MHz)
4, 6
, Specify Programming Information.
Front Packaging (Check One)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number
1
Back Packaging (Check One)
G - Plain White with Gloss Finish
2
1 - Plain White with Gloss Finish with Magnetic Stripe
2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number
1, 2
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number
1, 2
125 kHz Proximity Card Numbering
3
(Check One)
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
M - Sequential Matching Internal/External (Inkjetted)
Back Pack
aging
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Engraved)
4
B - Sequential Internal/Sequential Non-Matching External (Engraved)
4
C - Random Internal/Non-Matching Sequential External (Engraved)
4
Slot Punch
5
(Check One)
(IMPORTANT – MIFARE DESFire EV1 credentials do not allow a slot punch due to the antenna design
use a badge holder to attach this card to a lanyard or badge clip.)
N - No Slot Punch
13.56 DESFire Card Numbering
3
(Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequent
ial Matching Internal/External (Engraved)
4
B - Sequential Internal/Sequential Non-Matching External (Engraved)
4
C - Random Internal/Non-Matching Sequential External (Engraved)
4
Option - Custom Artwork
1
(Specify Artwork Number – Refer to the Custom Artwork Forms for new Artwork)
Enter your final card options from check boxes above. Example: 1457CNGGNNN
Final Part Number - (Options #)
13.56 MHz Programming Information 125 kHz Programming Information
Bit Numbers . (example: 26 bit)
Format Number
(example: H10301)
Facility Code .
(Custom Formats) Site Code .
City Code .
OEM Code .
Internal Card No. Start .
Stop .
External Card No. Start .
Stop .
PIN:
Sequential: Start # Random: Length .
Bit Numbers . (example: 26 bit)
Format Number
(example: H10301)
Facility Code .
(Custom Formats) Site Code .
City Code .
OEM Code .
Internal Card No. Start .
Stop .
External Card No. Start .
Stop .
Special Instructions: .
For Contact Smart Chip selection, refer to the Logical Access How to Order guide.
Standard configuration does not include a contact smart chip module.
1
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
2
Cards ordered with plain white front and back packaging, with no HID artwork or
with custom artwork, will still have a small “HID logo” "
" and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card.
3
The
external card number is placed in the bottom left-hand corner (125kHz) and in the bottom right-hand corner (13.56 MHz) on the back of the card on Proximity Programming only.
Permanent unique MIFARE 56 Bit serial # cannot be printed on cards.
4
For Laser Engraved external numbers, consult factory for lead times and cost..
5
Cards are provided with an
optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. Consult with the printer manufacturer prior to ordering.
6
Includes a permanent Unique MIFARE 56 Bit Serial number. * The composite construction is recommended for all cards with over-laminate applied.