Specifications
13.56 MHz How to Order Guide – D00529, D.5
1431/1441/1437/1447–Combination (MIFARE®/Prox) Card Ordering Guide
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
November 2010 © 2010 HID Global Corporation. All rights reserved Page 16 of 65
Base Model 1431 (1K) Standard PVC 1441 (4K) Standard PVC
Base Model 1437 (1K) Composite 40% Polyester / PVC * 1447 (4K) Composite 40% Polyester / PVC *
MIFARE Programming (Check One)
L - Programmed, (125 kHz only with HID Format)
6
. Specify Programming Information.
M - Programmed, HID MIFARE
6
(Specify HID format, for example H10301).
Front Packaging
B - Programmed, (125kHz and 13.56 MHz with HID Format)
6
. Specify Programming Information.
N - Non-Programmed (125 kHz & 13.56 MHz without HID Format)
6
. Programming Information Not Required.
S - Custom Programmed , (13.56 MHz only)
6
, Prox configured Specify Programming Information.
R - Custom Programmed , (125kHz and Custom 13.56 MHz with HID Format)
6
,
Specify Programming Information.
Front Packaging (Check One)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number
1
Back Packaging (Check One)
G - Plain White with Gloss Finish
2
S - Standard HID Proximity & MIFARE Artwork
2
1 - Plain White with Gloss Finish with Magnetic Stripe
2
2 - Standard HID MIFARE Artwork with Magnetic Stripe
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number
1, 2
Back Packaging
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number
1, 2
125 kHz Proximity Card Numbering
3
(Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Engraved)
4
B - Sequential Internal/Sequential Non-Matching External (Engraved)
4
C - Random Internal/Non-Matching Sequential External (Engraved)
4
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
Slot Punch
5
(Check One)
N - No Slot Punch (Printed location of vertical slot punch will remain)
V - Vertical Slot Punch
13.56 MIFARE Card Numbering
3
(Check One)
M - Sequential Matching Internal/External (Inkjetted) R - Random Internal/Non-Matching Sequential External (Inkjetted)
N - No External Card Numbering A - Sequential Matching Internal/External (Engraved)
4
U – UID (CSN) HEX card numbering only (Inkjetted)
B - Sequential Internal/Sequential Non-Matching External (Engraved)
4
C - Random Internal/Non-Matching Sequential External (Engraved)
4
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
Option - Custom Artwork
1
(Specify Artwork Number – Refer to the Custom Artwork Forms for new Artwork)
Enter your final card options from check boxes above. Example: 1441NGGNNN
Final Part Number -
(Options #)
13.56 MHz Programming Information 125 kHz Programming Information
Bit Numbers . (example: 26 bit) Bit Numbers . (example: 26 bit)
Format Number
(example: H10301) F
ormat Number
(example: H10301)
Facility Code .
Fa
cility Code .
(Custom Formats) Site Code .
City Code . (C
ustom Formats) Site Code .
City Code .
OEM Code .
OEM Code .
Internal Card No. Start .
Stop . I
nternal Card No. Start .
Stop .
External Card No. Start .
Stop . Extern
al Card No. Start .
Stop .
PIN:
Sequential: Start # Random: Length . Sp
ecial Instructions: .
For Contact Smart Chip selection, refer to Logical Access How to Order guide. Standard configuration does not include a contact smart chip module.
1
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
2
Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still
have a small “HID logo” " " and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card.
3
The external card number is placed in the bottom left-hand
corner (125kHz) and in the bottom right-hand corner (13.56 MHz) on the back of the card on Proximity Programming only.
4
For Laser Engraved external numbers, consult factory for lead times and cost.
5
Cards are
provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. Consult with the printer manufacturer prior to ordering.
6
Includes a
permanent Unique MIFARE 32 Bit Serial number. * The composite construction is recommended for all cards with over-laminate applied.