Specifications

13.56 MHz How to Order Guide – D00529, D.5
1430/1440/1436/1446 – MIFARE
®
Card Ordering Guide
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
November 2010 © 2010 HID Global Corporation. All rights reserved Page 15 of 65
1430 (1K) Standard PVC 1440 (4K) Standard PVC
Base Model 1436 (1K) Composite 40% Polyester / PVC * 1446 (4K) Composite Polyester 40% / PVC *
Programming (Check One)
M - Programmed, HID MIFARE
6
(Specify HID format, for example H10301).
N - Non-Programmed (13.56 MHz )
6
. Programming Information Not Required.
S - Custom Programmed, Specify Programming Information.
Front Packaging
Front Packaging (Check One)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number
1
Back Packaging (Check One)
G - Plain White with Gloss Finish
2
S - Standard HID MIFARE Artwork
2
1 - Plain White with Gloss Finish with Magnetic Stripe
2
2 - Standard HID MIFARE Artwork with Magnetic Stripe
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number
1, 2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number
1, 2
Back Packaging
Card Numbering
3
(Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
U – UID (CSN) HEX card numbering only (Inkjetted)
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Laser Engraved)
4
B - Sequential Internal/Sequential Non-Matching External (Laser Engraved)
4
C - Random Internal/Non-Matching Sequential External (Laser Engraved)
4
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
Slot Punch
5
(Check One)
N - No Slot Punch (Printed location of vertical slot punch will remain)
V - Vertical Slot Punch
Option - Custom Artwork
1
(Specify Artwork Number – Refer to the Custom Artwork Forms for new Artwork)
Enter your final card options from check boxes above. Example: 1430NGGNN
Final Part Number - (Options #)
13.56 MHz Card Programming Information
Bit Numbers . (example: 26 bit) Format Number (example: H10301)
Facility Code .
(Custom Formats) Site Code .
City Code . OEM Code .
Internal Card No. Start .
Stop .
External Card No. Start .
Stop .
Special Instructions:
.
For Contact Smart Chip selection, refer to Logical Access How to Order guide. Standard configuration does not include a contact smart chip module.
1
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
2
Cards ordered with plain white front and back packaging, with no HID artwork or
with custom artwork, will still have a small “HID logo” "
" and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card.
3
The
external card number is placed in the bottom right-hand corner on the back of the card on Proximity Format Programming only.
4
For Laser Engraved external numbers, consult factory
for lead times and cost.
5
Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. Consult
with the printer manufacturer prior to ordering.
6
Includes a permanent Unique MIFARE 32 Bit Serial number. * The composite construction is recommended for all cards with over-
laminate applied.