Specifications
13.56 MHz How to Order Guide – D00529, D.5
202/212 - Combination Card (iCLASS / Prox) Ordering Guide
The iCLASS Prox contactless smart card offers read/write and HID proximity capability in a single card. Add new applications while leveraging your
investment in existing access control systems. Personalize the card with a photo ID, magnetic stripe, barcode, or anti-counterfeiting element.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
November 2010 © 2010 HID Global Corporation. All rights reserved Page 10 of 65
Back Packaging
202 Standard PVC 212 Composite 40% Polyester / PVC *
iCLASS Memory Size and Allocation (Check One)
0 - 2k Bits (256 Bytes) with 2 Application Areas
1 - 16k Bits (2k Bytes) with 2 Application Areas
2 - 16k Bits (2k Bytes) with 16 Application Areas
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
Front Packaging
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
iCLASS Programming (Check One)
C - Configured, Non-Programmed iCLASS & initialized 125 kHz Proximity.
Programming Information Not Required.
A - Configured, Non-Programmed iCLASS, Programmed 125 kHz Proximity.
Specify Programming Information.
P - Programmed iCLASS only and Prox initialized.
Specify Programming Information.
B - Programmed 125 kHz Proximity and iCLASS. Specify Programming Information -
Front Packaging (Check One)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number
1
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
Back Packaging (Check One)
G - Plain White with Gloss Finish
2
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number
1
1 - Plain White with Gloss Finish with Magnetic Stripe
2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number
1
iCLASS Card Numbering
3
(Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequent
ial Matching Internal/External (Laser Engraved)
4
B - Sequential Internal/Sequential Non-Matching External (Laser Engraved)
4
C - Random Internal/Non-Matching Sequential External (Laser Engraved)
4
Slot Punch
5
(Check One)
N - No Slot Punch (Printed location of vertical slot punch will remain)
V - Vertical Slot Punch
125 kHz Card Numbering
3
(Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequent
ial Matching Internal/External (Laser Engraved)
4
B - Sequential Internal/Sequential Non-Matching External (Laser Engraved)
4
C - Random Internal/Non-Matching Sequential External (Laser Engraved)
4
Option - Custom Artwork
1
(Specify Artwork Number – Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from the above selections. Example: 2022LGGNNM
Final Part Number
- (Options #)
iCLASS Programming Information 125 kHz Programming Information
Bit Numbers . (example: 26 bit)
Format Number
(example: H10301)
Facility Code .
iCLASS Elite ICE Number (if applicable) - .
(Custom Formats) Site Code .
City Code .
OEM Code .
Internal Card No. Start .
Stop .
External Card No. Start .
Stop .
PIN:
Sequential: Start # Random: Length .
Bit Numbers .
(example: 26 bit)
Format Number
(example: H10301)
Facility Code .
(Custom Formats) Site Code .
City Code .
OEM Code .
Internal Card No. Start .
Stop .
External Card No. Start .
Stop .
Special Instructions: .
1
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
2
Cards ordered with plain white front and back packaging, or custom artwork, will
still have a small “HID logo” "
" and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card.
3
The external card number is
placed in the bottom right-hand corner for iCLASS 13.56 MHz and in the bottom center for 125 kHz Proximity on the back of the card.
4
For Laser Engraved external numbers, consult
factory for lead times and cost.
5
Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards.
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.