User Manual

Application Note 25 – Using the Model 6055B HID Mifare Reader Page 5
Fig 2 - Card Read Mode Options
Card Read Mode Description Comments
0 HID Data Only Reader looks in Sector 1 (or user-configured sector) first,
then scans MAD for the HID AID. If HID data is found, it
is output in Wiegand format as programmed, or if HID
data is not found, the card read fails.
1 HID+MIFARE
CSN
Reader looks in Sector 1 (or user-configured sector) first,
then scans MAD for the HID AID. If HID data is found, it
is output in Wiegand format as programmed, or if HID
data is not found, the reader outputs the CSN in the
configured Wiegand output mode.
2 CSN Only Reader outputs CSN in the configured Wiegand output
mode.
Fig 3- Card Serial Number Output Mode Options
CSN Output Mode Description Comments
0 32 bit, Outputs 32-bit CSN as Wiegand data (MSB first)
1 32-bit reverse
(6055A)
Outputs 32-bit CSN as Wiegand data in reverse order (to
match previous model 6055A)
2 26 bit Outputs 26-bit Wiegand data comprised of 16 lower bits
of 32-bit CSN, fixed 8-bit facility code, and beginning and
ending parity bits. Facility code defaults to 000, but can
be changed with a configuration card.
3 34 bit Outputs 32-bit CSN plus beginning and ending parity bits
as Wiegand data
4 40 bit Outputs 32-bit CSN plus 8-bit checksum as Wiegand
data
Contact HID Technical Support for information on ordering configuration cards, or
for information on card formats.
Existing Cards – Possible Scenarios
Because cards in an existing MIFARE card population have likely been encoded
by one or more application providers, HID has carefully designed its MIFARE
Readers and MIFARE Card Encoder to be adaptable to many different scenarios.
Scenario Method Comments
Customer has blank cards
with Philips default keys
Use MIFARE encoder –
encode HID data in sector 1
Encoder will set up
MIFARE Applications
Directory and indicate HID
data in sector 1.
Customer has encoded
cards with available sector
1 and Philips default keys
Use MIFARE encoder –
encode HID data in sector 1
Encoder will modify existing
MIFARE Applications
directory, indicating HID
data in sector 1