Datasheet

iCLASS SE How To Order Guide – D00545, C.8
Page 12 of 48 © 2007-2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved. February 2014
125 kHz Card Programming Information
Bit Numbers (example: 26 bit)
Format Number (example: H10301)
Facility Code
(Custom Formats) Site Code City Code OEM Code
Internal Card No. Start Stop
External Card No. Start Stop
Special Instructions: .
1
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
2
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo and reference number printed in the lower left-hand corner and a
slot punch target printed on the back of the card.
3
The external card number is placed in the bottom right-hand corner on the back of the card.
4
For Laser Engraved external numbers, consult factory for lead times and cost.
5
Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards.
6
The ability to add a horizontal slot punch requires a different iCLASS antenna design. Users can expect a read range reduction of approximately 20% if they order option H for the Slot
Punch.
7
H slot punch option is not yet supported on iCLASS 16k or 32k memory options.
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.