User's Manual

Table Of Contents

Using the Magnetic Encoding Tab – Custom Encoding or Raw Binary

Encoding Mode

You can change the Magnetic Track options for Tracks 1, 2 and 3 when using the Custom Encoding or

Raw Binary Encoding Mode. These options are not availabe for ISO or JIS II encoding.

Window TAB Procedure Procedure (continued)

Select 4 Bits to change the bits

per character to 4 BPC. (Note:

This is the default for Track 3).

Select 5 Bits to change the bits

per character to 5 BPC. (Note:

This is the default for Tracks 2

and 3).

Select 7 Bits to change the

bits per character to 7 BPC.

(Note: This is the default for

Track 1).

Select 8 Bits to change the

bits per character to 8 BPC.

Select NULL to change the

ASCII Offset to NULL.

Select SPACE to change the

ASCII Offset to SPACE. (Note:

This is the default for Track 1.)

Select ZERO to change the

ASCII Offset to ZERO. (Note:

This is the default for Tracks 2

and 3.)

Select 75 BPI to change the bits

per inch to 75 BPI. (Note: This

is the default for Track 2.)

Select 128 BPI to change the

bits per inch to 128 BPI.

Select 210 BPI to change the

bits per inch to 210 BPI.

(Note: This is the default for

Tracks 1 and 3.)

Select Custom BPI, which

enables the custom BPI text

box. (Note: The lower limit is

75 and upper limit is 210.)

DTC4500 Card Printer/Encoder User Guide