User's Manual

Page 4 of 19 February 13, 2008
© 2008 HID Global Corporation. All rights reserved.
SmartID Proximity Reader - 8030-901, Rev A.0
1 Products List
This guide is applicable for the following SmartID and SmartTRANS products:
HID Part
Number
HID Model Description
*8030xyzz S10 SmartID Mullion Reader
*8045xyzz SK10 SmartID Mullion Keypad Reader
**8100xyzz SP10 SmartTRANS Mullion Reader with HID/AWID Prox
**8110xyzz SPK10 SmartTRANS Mullion Keypad Reader with HID/AWID Prox
***8140xyzz SP10 SmartTRANS Mullion Reader with Indala Prox
***8141xyzz SPK10 SmartTRANS Mullion Keypad Reader with Indala Prox
Notes: ‘x’ = Revision of Main Board, ‘y’ = color of plastic housing and ‘zz’ = application
* UL Listed to UL 294.
** ETL Listed to UL 294 – UL Listing to UL 294 Pending.
*** UL Listing Pending.
Accessories:
HID Part
Number
Manual
Section
Description
500-0300 5.3 Tamper Switch
500-8090 5.4 Mullion SPMD – Switch Box Mounting Plate
500-9287 5.5 Mullion Reader Mounting Plate – Spacer
The accessories are not listed to UL294.
Accessories are compatible with all readers in this manual.
February 13, 2008
© 2008 HID Global Corporation. All rights res
e
SmartID Proximity Reader - 8030-901, Rev A.0
6 Regulatory
6.1 UL
These proximity readers are intended to be powered from
a
output of a previously certified power supply. These reader
s
used with listed (UL294) control equipment.
6.2 FCC / Canada Radio Certification
These devices comply with part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) Thi
s
harmful interference, and (2) This device must accept any i
including interference that may cause undesired operation.
modifications not expressly approved by the party responsi
void the user's authority to operate the equipment.
Le fonctionnement est soumis aux deux conditions suivant
e
peut pas causer de perturbations nuisibles et (2) ce disposi
perturbation quelconque qu’il reçoit, y compris des perturb
a
provoquer un fonctionnement indésirable. Les changemen
t
n’ayant pas été expressément approuvés par la partie res
p
conformité peuvent faire perdre à l’utilisateur l’autorisation
d
matériel.
This Category II radiocommunication device complies wi
t
Standard RSS-310.
Ce dispositif de radiocommunication de catégorie II resp
e
d’Industrie Canada.
The Carrier Frequencies and output power are as follows :
803xD, 810xD 13.56MHz -6.
5
810xD 125kHz <-4
d
6.3 CE Marking
HID Global hereby declares that these proximity readers a
r
essential requirements and other relevant provisions of Dir
e
6.4 Asia and Pacific Rim
Pending