User's Guide

7.2 Print Quality Defects (Section Incomplete)
7.2.1 Color Registration
Potential Cause
Potential Solution
Print position of printhead needs adjustment
Adjust printhead position setting
Acceleration of printhead causes localized
registration issues
Slow down scan speed
7.2.2 Banding
Potential Cause
Potential Solution
Nozzles out
Run deep cleans until nozzle check shows all
nozzles in.
If white ink, pigment has settled
Run agitation routine.
Ink starvation has occurred
Reduce print speed
Ink starvation has occurred
Increase ink temperature setting.
Too much ink
Use graphics screening, reduce pulse count
setting, reduce density of image in application
Pinning is not allowing ink to flow
Decrease or change pinning or reverse pinning
Ink does not flow sufficiently
Does primer below ink allow for more spread?