User's Guide

To remove the input card hopper from the input module, be sure the mechanical lock is unlocked, and
lift the card hopper out of the input module
3.10 Output Hopper
3.10.1 Loading the Output Card Hopper into the Output Module
The output card hopper can be loaded into the output module by placing the hopper in the opening in
the output module as shown below, and pressing downward until the output card hopper clicks into
place. The mechanical key lock can be used if desired to secure the cartridge in the output module.
To remove the output card hopper from the output module, be sure the mechanical lock is unlocked,
and lift the card hopper out of the output module