User's Guide

3.4.2 Module Alignment Guides
Module alignment guides are used between the input module, printer module, and output module to locate them
relative to each other.
Module Alignment Guide
To connect the input, printer, and output modules:
A. Place the printer module on the bench or table where it will be used
Caution: Lifting the print module must be done by 2 people.
B. Place module alignment guides on the left and right side of the print module as shown in the images
below. You will need to lift each edge of the print module in order to place the module alignment guides.
Note that the alignment guide is placed between the 2 notches circled in yellow. The printer baseplate
has slots which the alignment guide pins fit into.