User's Manual

K02013-000 Rev. A Page 5 of 5 06/08/04
Sector Read Only Mode
• In Sector Read Only Mode the reader reads and outputs a specified number of bits from a specified
sector based on a custom configuration of the reader. The following reader attributes can be configured
at the factory to meet individual needs:
1. Application sector (0 – 15 or 39 depending on 1K or 4K card)
2. Application block (0-2)
3. Sector keys
4. Number of output bit (1-128)
5. Starting bit number (0-127)
6. Error-Tone on invalid card/application
7. Audio/Visual feedback (On/Off)
Contacting Indala
6850 Santa Teresa Blvd.
San Jose, CA 95119-1205
Main Phone: [phone]
Main Fax: [phone]
US Toll-Free: 800 779 8663 (Sales); 800 646 3252 (Technical Support)
Web address: www.indala.com