instalación installation instalação installation installazione 安装 取り付け 설치 Установка iCLASS SE / multiCLASS SE ® ® 13.56 MHz Contactless INSTALLATION GUIDE R10 RP10 R15 RP15 RK40 R30 RP30 RPK40 R40 RP40 ACCESS flexibility. PLT-01579, A.
iCLASS SE / multiCLASS SE PLT-01579, A.0 R10, R15, R30, R40, RP10, RP15, RP30, RP40, RK40, RPK40 Parts List Componentes Pièces Peças Parts Lista • • • • • • • • • 1 1 2 3 2 1 2 1 1 - iCLASS SE / multiCLASS SE Reader - Installation Manual - 3.5 mm x .6 pitch x 12 mm Phillips machine screws - #6-32 x .375” Phillips self-tapping (mv) machine screws - #6 x 1.5” Phillips sheet metal screws - #6 x .
iCLASS SE / multiCLASS SE PLT-01579, A.
iCLASS SE / multiCLASS SE PLT-01579, A.
iCLASS SE / multiCLASS SE PLT-01579, A.
iCLASS SE / multiCLASS SE PLT-01579, A.
iCLASS SE / multiCLASS SE PLT-01579, A.
iCLASS SE / multiCLASS SE PLT-01579, A.0 R10, R15, R30, R40, RP10, RP15, RP30, RP40, RK40, RPK40 Optional Features • • • • Características opcionales Caractèristiques en option Recursos opcionais Optionale Features Funzioni opzionali オプション機能 可选功能 선택 사양 기능 ДОПОЛНИТЕЛЬНЫЕ ВОЗМОЖНОСТИ Open Collector Output - Controls an external device (16 VDC Max) operating in Host Mode only. Sink - 40mA / Source - 1mA. See the iCLASS Application Note for details.
PLT-01579, A.0 iCLASS SE / multiCLASS SE R10, R15, R30, R40, RP10, RP15, RP30, RP40, RK40, RPK40 • Uscita collettore aperto – Controlla un dispositivo esterno (massimo 16 V c.c.) che funziona solo in modalità host. Sink - 40mA / Source - 1mA. Per dettagli in merito, vedere la nota applicativa iCLASS. • Tamper ottico – per l’attivazione del tamper ottico è necessaria una tessera di configurazione. Una volta attivato, se la piastra posteriore viene rimossa, il dispositivo viene attivato.
UL Connect only to a Listed Access Control / Burglary power-limited power supply. These readers are intended to be used with listed (UL294) control equipment. Only Wiegand and RS-485 communications have been evaluated by UL. FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
