BEEKs KEYFOB USER GUIDE Document Version: 1 Product ID: BEEKSKF September 2017
Copyright © 2007-2019 Bluvision/HID Global Corporation/ASSA ABLOY AB. All rights reserved. This document may not be reproduced, disseminated or republished in any form without the prior written permission of HID Global Corporation. Trademarks Bluvision, HID GLOBAL, HID, the HID logo are trademarks or registered trademarks of HID Global Corporation, or its licensors, in the U.S. and other countries. Contacts For additional offices around the world, see www.hidglobal.com corporate offices.
USER GUIDE Getting Started The Bluvision BEEKs CM User Guide covers the basics of the equipment setup and provisioning of equipment with Bluzone Cloud account and project. For a more in-depth explanation, see Bluvision Developer web site https://bluvision.atlassian.net/wiki/spaces/PDP/pages/13041816/04.+How-to+Setup+BEEKs CMs Prerequisites This equipment requires the steps below be followed prior to provisioning your BEEKs CM device. These prerequisites are NOT covered within the installation guide below.
Application/Service/Profile • iBeacon support • sBeacon support • Eddystone support • Fully open and easily configurable for 3rd party beacon protocol
How-to Provision BEEKs CMs This will guide you through provisioning your BEEKs CM of your Bluzone Account and assigned project. Step-by-step provisioning guide There are 2 steps to the provisioning process: 1. 2. Download Bluzone Application from Apple App Store. Physically provisioning BEEKs CM using the Bluzone App. This requires BLE be enabled on device.
Provisioning Step 2 - Provisioning of a BEEKs CM using Bluzone Mobile Application Provisioning Steps Step 2 - Launch the Bluzone app on your iOS device
Step 2.1 Sign In - Sign in using your Bluzone account’s registered username and password Step 2.
Step 2.3 Select BEEKs CM Provisioning – Click / Select BEEKs CM within option menu. Step 2.4 Select Your BEEKs CM – Select the closest BEEKs CM device from all BEEKs CM devices in range of mobile phone. Please make sure you are within 1 meter of device. The BEEKs CM Icon’s green color indicates the relative proximity to BEEKs CM device. The greener color displayed, the closer you are to BEEKs CM device.
Step 2.5 WiFi Template - Choose appropriate BEEKs CM template. If this list is empty, please complete the required prerequisite step of creating BEEKs CM WiFi template on https://bluzone.io in your assigned project. Step 2.6 BEEKs CM Location - Next you will be prompted to select/assign the physical geo location of the BEEKs CM where it is being physically installed. Location is assigned by GPS and can be changed manually by dragging the pin in order to be more accurate.
Step 2.7 BEEKs CM Selfie - Next you will be prompted to take a picture of the BEEKs CM. This is called a “Selfie” within Bluzone application. This is an optional step and is recommended so that others can easily identify the location of the BEEKs CM after deployment Step 2.8 BEEKs CM Profile - Next you will be prompted to enter a name for the BEEKs CM. You may keep the default name but it is recommended to choose a unique name that is meaningful to you.
Step 2.9 Provision Request – Please wait for provisioning process to complete. This will be indicated using progress indicator / spinner located on screen. Congratulations, you have provisioned you first Bluvision BEEKs CM on Bluzone.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A/B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
