User's Manual

identiCLASS Developer Tool Kit User Guide
3. If you have more than one reader connected to the computer, choose it in the drop-
down box at the top of the screen.
4. Choose the standard for which you want to apply these settings by choosing one of
the tabs on the left.
5. If you have more than one antenna connected to the reader, choose the antenna
whose settings you want to configure: Antenna 0, Antenna 1, Antenna 2.
6. Set values according to standard configuration for: in this drop-down box
choose the type of antenna you are configuring:
ID0 -> Internal is the built-in antenna
ID1 -> External is the small external antenna
ID3 -> External is the large external antenna
6. Enter the new values for the parameters you want to change in the column which is
headed Register Values.
7. For every value you change, click the box in the Apply Settings column.
8. When you have finished making changes, click the
button at the top of the
screen. The new changes are sent to the reader board.
Page 20 of 24 October 2010
HID GLOBAL CONFIDENTIAL AND PROPRIETARY INFORMATION. Use and disclosure of this information is strictly
restricted by the terms of a non-disclosure agreement with HID Global Corporation. If you have received this information and
are not an intended recipient or are not subject to or do not agree to be bound by the terms of the non-disclosure agreement,
please immediately return this document to HID Global Corporation, 15370 Barranca Pkwy, Irvine, CA 92618-3106..