ACCESS flexibility. Ultra High Frequency U90 (U90.915 & U90.865) Reader iCLASS SE ® INSTALLATION GUIDE PLT-01545, A.
iCLASS SE U90 (U90.915 & U90.865) PLT-01545, A.0 Parts List Parts 1 1 2 2 2 1 1 1 - iCLASS Reader Installation Guide #6-32 x .375” Phillips machine screws #6-32 x .
U90 (U90.915 & U90.865) PLT-01545, A.0 1 Mounting iCLASS SE There are many options for mounting surfaces (pole, concrete, metal, wall bracket, etc.). See the iCLASS SE U90 Reader User Guide for detailed information. 200 200 VESA CONDUIT US JBOX 100 75 75 100 EU JBOX EU JBOX EU JBOX EU JBOX 75 100 200 US JBOX 75 100 200 Mounting holes need to be drilled to mate with the mount selected for the site.
iCLASS SE 2 U90 (U90.915 & U90.865) PLT-01545, A.
U90 (U90.915 & U90.865) PLT-01545, A.0 3 Install Reader to Backbox 4 Power & Testing Turn power on iCLASS SE Basic test of a card LED is under the trap door LED will be red (under the trap door) LED will be Green Note: This is tested with a card mounted in a vehicle and driven by the reader. Configurable Features • • • Open Collector Output - Controls an external device (16 VDC Max) operating in Host Mode only. Sink - 40mA / Source - 1mA. See the iCLASS Application Note for details.
UL Connect only to a Listed Access Control / Burglary power-limited power supply. These readers are intended to be used with listed (UL294) control equipment. Only Wiegand and RS-485 communications have been evaluated by UL. CAUTION: Any changes or modifcations to this devise not explicitly approved by the manufacturer could void your authority to operate this equipment. FCC This device complies with part 15 of the FCC Rules.
