User Manual
902 ~ 928 MHz Wireless-LAN
WS200 / WM200 User Manual
2001-01-09
LQWHUQDOXVHRQO\
Mt l S t dSlti K
2.1. Mobile has one connector, LED indicators.
1. RS-232 & Power
Connector
A DB-9 connector for connecting to data terminal equipment
(DTE) and +12~+24V DC power input.
1,6 Power +12~+24V DC power input.
2 TX of RF-LAN RS-232C communication TX-line of RF-LAN.
3 RX of RF-LAN RS-232C communication RX-line of RF-LAN.
4,5,9 GND GND
2. Power LED This LED turns on when DC-Power on.
3. Status 1 LED This LED display Wireless-LAN’s Status.
4. Status 2 LED This LED display Wireless-LAN’s Status.
5. Wired TX LED This LED turns on when Wired TX-signal is.
6. Wired RX LED This LED turns on when Wired RX-signal is.
7. Wireless TX LED This LED turns on when Wireless TX-signal is.
8. Wireless RX LED This LED turns on when Wireless RX-signal is.
9. DIP Switch (Not Defined.)
Inside located. (Can’t view on outside.)
Exhibit 08