User Manual

902 ~ 928 MHz Wireless-LAN
WS200 / WM200 User Manual
2001-01-09

LQWHUQDOXVHRQO\
Mt l S t dSlti K
A. Check wired connection condition.
B. Reconnect wired connection.
C. Please. Call repair-department.
6.2. When Status LED didn’t flicker by 10-second, periodically.
A. Check wired connection condition.
B. Reconnect wired connection. (And, Please. Call repair-department.)
6.3. When Validator display “RF1”-> “Fail” (Mobile can’t wired-communicate with
validator).
A. Check wired connection condition.
B. Reconnect wired connection. (And, Please! Call repair-department.)
6.4. When BMS display “Wired communication is failed”(Station can’t wired-
communicate with BMS).
A. Check wired connection condition.
B. Reconnect wired connection. (And, Please. Call repair-department.)
6.5. When Mobile can’t communicate with Station (Wireless-communication can’t
more). Validator’s display : “RF2 -> Fail”, BMS’s display : “Wireless communication
is failed”
A. Check Mobile condition.
B. Check distance of Mobile and Station.
C. Check Mobile antenna right up and antenna’s connectors.
(Antenna condition checking.)
D. Check Station antenna right up and antenna’s connectors.
(Antenna condition checking.)
E. Please. Call repair-department
Exhibit 08