User's Manual

K02021-000 Rev A April 2006

1.3 Specifications

• Input Voltage: 12.0 VDC to 24 VDC.

• Input Current/Power

-Typical, quiescent off metal Vin = 12.0 VDC 1.0 A 12 W

Vin = 24.0 VDC 750 mA 18.0 W

-Maximum, quiescent off metal Vin = 12.0 VDC 1.2 A 14.4 W

Vin = 24.0 VDC 920 mA 22.1 W

-Maximum Power 12.0 VDC ≤ Vin ≤ 24.0 VDC 22.1 W

• Recommended Power Supply: Regulated linear power supply

12 VDC at 1.5 A (per reader)

24 VDC at 1.0 A (per reader)

• Read Range with the Indala

FlexCard

Card Up to 28.0” (71.7 cm)

• Operating Temperature Range: -35°C to +65° C (-31°F to +149°F)(See Note 2.)

• Color: Black

• Material: UV resistant, ABS /polycarbonate (UL94V0) plastic.

• Weight (Typical): 3.2 lbs (1.45 kg)

• Dimensions: 11.2” H x 11.2” W x 1.8 “T (28.4 x 28.4 x 4.6 cm)

• Output Formats: Wiegand, ABA track2 Magnetic Stripe. (Contact Factory for

other formats.

• Certification UL-294 indoor and outdoor compliant, CE Mark, and FCC

Class B Digital Device (Part 15) ID Numbers E9U620.

Note 1 Read Range is stated in an undisturbed electrical environment, with card presented

parallel to reader, and reader installed in accordance with Indala instructions. The power

supply, reader and controller must be on the same ground, connected to earth.

Note 2. At temperatures below -20ºC the beeper output may not be audible, except at short

distances.

Note 3. The ASR620++ reader is tuned for mounting on non-ferrous surfaces. If the reader must

be mounted on, or near, a ferrous surface a minimum 3 inch (7.6cm) non-ferrous spacer

must be used.

Note 4. There is no longer a need for the CT-620 power conditioner with the ASR-620++. The

CT-620 was necessary in earlier versions of the ASR-620 to meet European emmissions

standards, but is not needed with the ASR-620++.