User's Manual







ANSWER TO POLL, command, 5-20
Answer to Reset, 5-6
ATR, format, 5-6

Boot Sequence, 5-29
BREAK CHARACTER, command, 5-26

CAD
major components, 1-2
management commands, 5-8
simplified block diagram, 1-4
typical application, 1-2
CADTools, software
installing, 2-4
launching, 2-5
CARD PRESENCE, command, 5-24
checkout, final, 2-20
command, sequences, 5-28
command protocol, TerminalĆtoĆCAD, 5-2
command sequences, 5-28
commands, CAD management, 5-8
components, CAD
detailed, 1-6
primary, 1-3

dc power, verifying, 3-2
DETECT CARD, command, 5-22
Detect Card Sequence, 5-34
download, software, A-3
DOWNLOADING, command, 5-14
Downloading sequence, 5-30

epilogue, field, 5-4
equipment, required
for final checkout, 2-20
for Self Test Utility, 2-4
for Tuning, 2-11
ERROR REPORT, command, 5-16

fault isolation, procedures, 3-2, 3-3
FLASH, upgrade, procedure, A-3

information, field, 5-4
inspecting
CAD, 2-2
CAD sets, 2-2
installing
CAD into terminal, 2-18
CADTools software, 2-4

launching, CADTools software, 2-5
LED indicator, verifying, 3-2
Long Poll Sequence, 5-33

major components, CAD, 1-2
mounting, into terminal, 2-18

operation, verifying proper, 2-4
overview, CAD product, 1-2

POLL, command, 5-18