User's Manual

installation

iCLAS

assembly and disassembly

preparing

testing

Open Collector

Hold

Beeper

Red LED

Green LED

Ground Shield

+DC (12 – 24 VDC)

Data 1

Data 0

Ground

Not Used

Wiring diagram

Mounting Holes

R90 Install Manual.indd 1 9/19/05 2:31:48 PM

PAGE 1
installation 1 y b S S A L iC ® ® preparing Wiring diagram Open Collector Hold Beeper Red LED Green LED Ground Shield +DC (12 – 24 VDC) Data 1 Data 0 Ground Not Used Not Used Not Used Not Used Not Used Not Used Mounting Holes 2 assembly and disassembly R90 Install Manual.
PAGE 2
TAMPER SWITCH R90 • Long Range Reader 4 An on board tamper switch is wired through the “I’m Alive” feature and if active, the standard supervisory signal will stop if the cover is removed. 5 OPTIONAL FEATURES • Open Collector Output - controls an external device operating in Host Mode only. See iCLASS Application Note for details. • Configuration Options - Configure LED, Speaker, and other features. See How To Order Guide or iCLASS Application Note for details.